Do you need to install SATA drives?

This is just GOOD PRACTICE; the windows drivers while being good enough, and being from the manufacturer are really only to get the system up and running, you should always install all drivers relevant to the hardware included on the motherboard to take advantage of any special features and optimizations that the …

Does formatting PC remove drivers?

Sure it will. Now format your PC without worrying about the drivers. Now to restore the drives again run the DrvBK.exe and “Open backup file” there you select the . bki file from your USB flash drive or wherever you have stored the backup files to.

Do I need to reinstall Windows if I use the same hard drive?

Nope, you should be good to go. If you have already installed windows on your HDD then no need to reinstall it . The SSD will get detected as a storage medium and then you can continue using it . But if you need windows on the ssd then you need to clone the hdd to the ssd or else reinstall windows on the ssd .

What does a SATA cable look like?

SATA cables are long, 7-pin cables. Both ends are flat and thin, with one often made at a 90-degree angle for better cable management. One end plugs into a port on the motherboard, usually labeled SATA, and the other (such as the angled end) into the back of a storage device like a SATA hard drive.

Where do you connect SATA?

SATA uses simple cables that are keyed to fit on the drive and motherboard connector one way. Connect one end of the SATA cable to the drive, and the other end to an available SATA port on your motherboard, and you’re halfway there. Some SATA data cables come with L-shaped ends, which can help keep cables tidy.

What do you lose if you reset your PC?

During the factory resetting process, your PC’s hard drive is completely erased and you lose any business, financial and personal files that may be present on the computer. Once the resetting process starts, you cannot interrupt it.

Does Windows 10 reset wipe drivers?

Windows 10 Reset: Remove everything Reinstalls Windows 10 and removes all your personal files. Removes apps and drivers you installed. Removes changes you made to settings. Removes any apps your PC manufacturer installed.

How do I reinstall Windows 10 after failing hard drive?

Reinstall Windows 10 to a new hard drive

Back up all of your files to OneDrive or similar.
With your old hard drive still installed, go to Settings>Update & Security>Backup.
Insert a USB with enough storage to hold Windows, and Back Up to the USB drive.
Shut down your PC, and install the new drive.

How do you reinstall Windows 10 but keep files and programs?

By using Repair Install, you can choose to install Windows 10 while keeping all personal files, apps and settings, keeping personal files only, or keeping nothing. By using Reset This PC, you can do a fresh install to reset Windows 10 and keep personal files, or remove everything.

What does SSD plug into?

SATA cable
To install the SSD as a secondary drive (not your primary or boot drive), use a SATA cable and attach one end of the cable to the SATA connector on your motherboard. Attach the other end of the SATA cable to your Crucial SSD.

Do you need a SATA drive for a new computer?

So chances are, if you’re upgrading or building a new computer, you’re going to run into SATA drives sooner or later. SATA drives are much easier to connect than their old IDE predecessors, relieving some of the stress of computer maintenance. Read on after the jump to learn how to install SATA hard drives and optical (CD/DVD) drives.

How to format a new SATA external hard drive?

Click “Disk Management” in the Storage section of the left panel. A graphic representation of your drives and their partitions will appear in the bottom part of the window. Right-click on the “Unallocated” bar, which represents your new drive, and pick “New Simple Volume.”

Do you need to format an SSD before installing Windows?

Just start a 1-on-1 chat online with a tech and ask anything. Get solutions in just minutes right now. You do not need to, however it’s advised to format the primary drive’s (SSD or HDD) primary partition (C:\\ for Windows usually) before (re-)installing windows.

Do you have to format drive to install Windows 10?

Installing Windows 10 would prompt you at some point, asking which drive to install Windows into. In this window, simply select the drive, create the partitions and there should be an option to format the drive, depending on the build. Even if the option to format doesn’t show up, you can still delete and create new partitions.