How do I reset my car stereo to factory settings?

How do I reset my car stereo to factory settings?

To do this, You have to turn your ignition to the ON position. Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes.

How do I enter my Honda radio CODE 0?

input the 3 using the preset button. using the tune knob, rotate it until #0 appears. Using the tune knob, rotate it until #9 appears. Your radio should now be unlocked.

How do you unlock a Honda radio without the CODE?

Turn off the radio so the screen is blank, not showing CODE or ERR. With one hand, simultaneously press and hold the one (1) and six (6) buttons on your radio. With your free hand (and while holding down the one and six radio buttons), turn the radio on.

How to test multi center display on Mitsubishi Eclipse?

Connect the meter to pin 9 (Black wire) of the display and the black wire on the radio 8 pin connector and record the resistance. Connect the meter to pin 10 (Red wire) of the display and the red wire on the radio 8 pin connector and record the resistance. Let me know the results of those four tests. Was this answer helpful?

How does the security code work on a Mitsubishi?

As part of the radio’s anti-theft system, the radio disables itself when it loses power from the vehicle’s battery. If the radio display indicates “CODE” or “OFF,” then the radio security code must be entered into the radio in order for the radio to work.

How do you record resistance on Mitsubishi Eclipse?

Connect the meter to pin 9 (Black wire) of the display and the black wire on the radio 8 pin connector and record the resistance. Connect the meter to pin 10 (Red wire) of the display and the red wire on the radio 8 pin connector and record the resistance.

How does the meter work on a Mitsubishi Eclipse?

Connect your meter to pin 7 (Brown wire) of the display and the Brown wire on the radio 8 pin connector and record the resistance. Connect the meter to pin 8 (White wire) of the display and the white wire on the radio 8 pin connector and record the resistance.