When did the Smith and Wesson 32 long CTG come out?

When did the Smith and Wesson 32 long CTG come out?

Here is an example on a 1955 Combat Masterpiece: The arched silver medallion grips mark it to the period of say 1930 to WWII. It is a Regulation Police by grip configuration and serial number location. .32’s were not RP marked and their serials are concurrent with the 1903 HE.

How old is the Smith and Wesson 32 Hand Ejector?

In addition, later models (post WW-II) often had a letter prefix in the serial number. .32 Hand Ejector Model of 1903 (2nd Change). Barrels usually marked “.32 S&W Long Ctg.” S&W Model 30. The Model 31 had a less rounded “square butt” grip. Barrels are marked “.32 S&W Long Ctg”

What’s the serial number of a Smith and Wesson 32?

Caliber .32 Rimfire. Serial number 13448. Revolver falls in Civil War era production. Barrel has been shortened to 3 3/8″, which makes the barrel handle better and more concealable. Action works perfectly. Good overall condition. Smith & Wesson Single Action Revolver .38 S&W…

What is the number on a 32 long CTG revolver?

On the other side it has 32 LONG CTG on the barrel and MADE IN USA at the trigger. Under the handle it has the number 518528. There is also a number on the side end of the chamber from which the shells are inserted. That number is 518528. Inside of the chamber at the hindge is 2 numbers which are the same. The number is 21071.

When is the latest Smith and Wesson patent date?

On the top of the barrel, it has the S&W as the manufacturer, Springfield, Mass, USA, and gives patent dates. The latest date is DEC 29, 14. On the side of the revolver that has the chamber release, it has SMITH & WESSON on the side of the barrel.

When did the Smith and Wesson 32 Hand Ejector come out?

You appear to have a third model .32 hand ejector that shipped ‘twixt 1911 and 1942. The numbers from that era run from 263001 through 536684. Yours would be in the later part of that range. The finish looks great and the wear on the checkered grips adds a lot of character. The finish is nickel.

How to identify a Smith and wesson.38 special CTG?

Count the number of chambers on the revolver. The .38 Special CTG is a six-shooter. Measure the barrel and make sure it is six inches. Cross reference the serial number with Smith & Wesson’s customer service (see Resources). Submit the serial number to the S&W service via email to confirm the firearm is indeed the .38 Special CTG.

What was the first gun made by Smith and Wesson?

The company’s first offering was a lever-action repeating pistol. Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns. As of March 2011, Smith & Wesson offers approximately 110 different pistols of varied designs and features. Examine the barrel of the Smith & Wesson pistol.

What’s the serial number on a Smith and Wesson 32?

A friend of mine just inherited a Smith and Wesson .32 and I am trying to help him. Serial # is 693448. I have no idea which model this is, and any help would be greatly appreciated, from an owner of a Model 25 that I already regret selling.

How to date a Smith and Wesson revolver?

For the exact date on your gun request the letter from S&W Historian Roy Jinks. Pre-War N frame. *Note that a number of N frames with serials in the S138000-S140000 range (and the range may be wider either way) are seen that were shipped much later than the serial would suggest should be the case.

What kind of ejector does a 32 hand revolver have?

They were 5-screw square-butt. The .32 Hand Ejector (third model) was a 5 screw round-butt. S&W combined these two models within the same serial numbers. I am thinking the barrel length on this revolver is going to be rare compared to the shorter barrels that are usually seen?

What kind of gun is a 32 S & W Long?

.32 S&W Long. The .32 S&W Long, also known as 7.65x23mm, is a straight-walled, centerfire, rimmed handgun cartridge, based on the earlier .32 S&W cartridge. It was introduced in 1896 for Smith & Wesson’s first-model Hand Ejector revolver.

What does CTG stand for on a Smith and Wesson?

CTG stands for cartridge and indicates what cartridge the gun is chambered for. It’s not a model name or number. I was able to get some pics. Only found 1 serial number on the gun. Didn’t want to remover the handles You have a Model 1903, 1st Change from 1904.

What was the Smith and Wesson 32 caliber revolver made out of?

Patented April 3, 1855; July 5, 1859; November 21, 1866. 93,980 manufactured from January 1869 to 1875. Frame —Round butt made of steel irregular shape side plate, solid straight guard. Finished in blue or nickel. Barrel —Round body, ribbed top, jointed to frame at top strap.

Where can I buy a Smith and Wesson 32?

Smith & Wesson 32 Long, 32 Hand Ejector 2ND Model of 1903 , serial # 161697, 4 1/4″ BBL, 6 shot fluted cylinder – .32 S&W BuyItNow! Smith & Wesson RemUMC 32 Cartridge – .32 S&W BuyItNow! Smith & Wesson Generic – 32 shotshell Cartridge – .32 S&W BuyItNow! Smith & Wesson 2 59 Series Magazines 9mm 32rd NEW Pro Mag BuyItNow!

What kind of Revolver is a Smith and Wesson?

THIS IS A SMITH & WESSON MODEL 1 1/2 FIRST ISSUE, .32 RIM FIRE SHORT. THE REVOLVER IS IN VERY GOOD CONDITION. ALL ORIGINAL, NUMBER MATCHING, VERY GOOD BORE AND GRIPS (CUSTOM MADE),… (read more) THIS IS A SMITH & WESSON “LEMON SQUEEZER” 1ST MODEL REVOLVER, .32 S&W. THE REVOLVER IS IN VERY GOOD CONDITION.

When did the Smith and Wesson Model 10-7 come out?

Excellent overall condition. The Smith & Wesson Model 10-7 began its initial production in 1977, and fulfilled the expectations set by a series of Model 10’s which preceded it. The Model 10, th …Click for more info

What’s the serial number on a Smith and Wesson?

Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup. For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1 1952 = 7369 – 21342 1953 = 28916 1955 = 55050 – 75000 1957 = 117770 – 125000 1962 = starts at 295000 1969 = ends at 786544 J serial Prefix serial numbers. For models 36, 37, 38, 49, 50.

How big is a Smith and Wesson 32-44 target?

Smith & Wesson .32-44 Target model. Barrel length 6 1/2″. Bore has strong rifling and some very light corrosion in the grooves. Numbers are matching. Gun is sharp with excellent markings. Gun has approximately 30% blue, the balance is a smooth blue-brown patina. Grips are good plus with a scuff at the left side front toe.

Is the 32 Winchester CTG pistol still available?

The revolver was know as the Military & Police model and was chambered for several cartridges including 38 Special, 32 WCF and 38 S&W. Today (actually since 1957) it is known as the Model 10 and is still available. I have two of the 32 WCF, also known as the Winchester Model.

What kind of grips do Smith and Wesson use?

Pistol Grips MGW carries a wide variety of Smith & Wesson pistol grips that are crafted to high standards and designed for many models of S&W pistols and rifles. Select from grip sets, polymer grips, wood grips, and other grip components.

What kind of Butt does a Smith and Wesson Revolver have?

If the back-strap curves, then the grip frame is a “Round” Butt. If the back-strap angles straight down like a ski-slope, with a point at the bottom, then the grip frame is a “Square” Butt. Click on the Chart of Smith & Wesson Model Numbers in order to find your grip frame.