# How do you drop voltage from 12V to 10v?

## How do you drop voltage from 12V to 10v?

1. To drop voltage from 12V to 10.5V using resistors then you can use 2 resistor in series.
2. R2/(R2+R1) × 12V = 10.5V.
3. Solving the equation gives:
4. R2=7×R1.
5. Therefore if you choose R1 to be 4.7kOhm, R2 wil be 33kOhms.

### How do I reduce 12V to 9V?

To reduce a 12V circuit to 9V, place two resistors in series within the circuit. Find the difference between the two voltages (12V – 9V = 3V) to determine the total amount of resistance needed.

How do you lower the voltage of a battery?

Sometimes, your electronics project might just need a voltage source that’s lower than the battery voltage you have available. When this happens, you can reduce your battery’s voltage to any level you want by building a simple circuit called a voltage divider.

How do you convert 12V to 3V?

This is the simple method for converting 12v to 3v, all you need to know is the voltage divider. The voltage divider networks can be used to decrease any DC voltage, voltage divider networks only have 2 resistors. The output voltage changes according to the resistor values.

## How do you convert 12v DC to 4v DC?

Two ways to reduce a 12-volt system to 4 volts are to use voltage dividers or Zener diodes. Voltage dividers are made from resistors placed in series. The input voltage is divided into an output that depends on the value of the resistors used.

### Will any 12V adapter work?

Voltage has to be an exact match. A 12V DC device needs a 12V DC adapter. If your device states it is 12V 3A, a 3A adapter can handle that load, but so can a 4A and 5A. The higher amperage (amp) power supply will not have to work as hard to handle a smaller load, and will run cooler and more stable.

What is a 12 volt power supply?

The 12 Volt Power Supply is a throwback to the early days of electronics when 12V was a common battery output. With the advent of solid state equipment the move to consumer use in automotive and home was inevitable as one basic design was universal. The large linear supply known for it rugged construction,…

What is a 12V power inverter?

A power inverter is a device which converts battery power into mains power, i.e. it transforms 12V direct current (DC) into 230V alternating current (AC).

## What is a 12 volt power adapter?

The 12 Volt Power Adapter, also known as a “Brick”, “Desk Wart” and “Floor” supply, provide a regulated 12 Volts DC output. A 12 Volt Adapter Power Supply is enclosed in a plastic protective case that comes with either an attached AC cord, or a mating socket for one of the 3 common IEC cordsets.

### What is 12 volt DC?

A 12V socket is a cylindrical receptacle that provides direct current (DC) at 12 volts to a device plugged into it. The most commonly known 12V sockets are found in automobiles, and were originally provided as part of a system that heated a metal coil in a heat-proof holder to light cigars and cigarettes.