What are the different settings you can configure in BIOS?

What are the different settings you can configure in BIOS?

Common BIOS Settings Explained

  • CPU Frequency Settings. If you have an unlocked processor (e.g. Intel’s “K” series), these settings can change the frequency of the CPU and adjust the voltage received by the CPU.
  • Memory Timings.
  • Boot Order.
  • SATA Settings.
  • USB Settings.
  • Display Settings.
  • PWR Options.
  • Wake-on-LAN.

What is the most commonly modified settings in the BIOS?

The most common BIOS settings for modification are: Changing the boot order. Adjusting available video memory. Setting a BIOS password.

What is the common key to access BIOS setup utility?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

What are BIOS settings?

BIOS stands for “Basic Input/Output System”, and is a type of firmware stored on a chip on your motherboard. When you start your computer, the computers boots the BIOS, which configures your hardware before handing off to a boot device (usually your hard drive).

What is the purpose of the BIOS setup utility?

BIOS Setup Utility The computer BIOS setup utility (also known as the CMOS setup) is the place where you can change a few basic computer hardware settings. The BIOS and CMOS often get confused but there is quite a difference. The BIOS contains all the settings and the CMOS memory is a piece of RAM that remembers all the info.

What do I need to know about BIOS settings?

Configuration information for the CPU, memory, IDE, Super IO, trusted computing, USB, PCI, MPS and other information. BIOS Advanced Menu Screens PCI Configure the server to clear NVRAM during system boot. BIOS PCI Menu Screens Boot Configure the boot device priority (storage drives and the DVD-ROM drive). BIOS Setup Utility: Boot – Boot Settings

Where is the BIOS configuration program stored on a computer?

On most systems built since the late 1980s, the BIOS configuration program is stored in the BIOS chip itself. On a few current systems, as with the original IBM AT, the setup program must be run from a floppy disk drive or the hard drive.

What happens if the BIOS settings are invalid?

If the configuration stored in the CMOS RAM is invalid, the BIOS settings default to the original state specified at the factory. The following topics are covered: Using BIOS Setup Utility Menu Items BIOS Setup Screens Overview BIOS Setup Utility Menu Screens Default BIOS Power-On Self-Test (POST) Events BIOS POST F1 and F2 Errors