Can you use 40W instead of 25w?

Can you use 40W instead of 25w?

Yes, that’s fine.

Can you use a 40 watt fluorescent bulb?

Assuming that the maximum power supported by the lamp is 60-watt and taking it to be the rating of the lamp, you can use a 40-watt bulb in it. This is because the 40-watt bulb will always draw current less than the lamp would in full load that is 60-watt.

Can you replace a 40W bulb with a 60W?

If you’re talking about an incandescent light, you can replace it with a 40 Watt bulb, a 15 Watt bulb, or even a 120 Watt bulb. If you change from a 60 Watt incandescent to a 40 Watt one, you’ll notice a few things. Light output will be the first.

Can you replace a 34 watt fluorescent bulb with a 40 watt fluorescent bulb?

Yes you are fine.

Can I use 40W instead of 34W?

Usually it’s fine to swap a 40W tube with a 34W tube, but some ballasts can overheat with a 34W tube installed. Check the ballast to see if it says it’s rated for 34W tubes, and if it doesn’t then check with the manufacturer of the ballast.

Can you use a higher watt fluorescent bulb?

Yes, you can use a compact fluorescent (CFL) bulb that produces more light as long as it doesn’t exceed the wattage recommended for the fixture. A CFL bulb that produces the same amount of light as a 60 watt incandescent bulb (900 lumens) only uses around 15 watts of electricity.

What is the equivalent to a 40W bulb?

Compare wattage

Can you use a different wattage bulb?

Yes, you certainly can use bulbs of different wattages in your fixture. The fact that one socket pulls more current is not important. Bulb size is mostly a matter of light distribution and heat management.

Can a 40 watt bulb be used in a 32 watt fixture?

Moreover, the existing LED bulbs can operate in the fluorescent fixtures with ballasts as well that have a 2-pin connection of G13. 2. Can you use a 40 watt bulb in a 32 watt fixture?

Can I replace a 34 Watt T12 flourescent bulb with a 40?

I am replacing a GE Class P #8G1075 ballast with a new GE ballast that powers 1 T12 40 watt fixture product code 93896. The old ballast has 2 red … read more Ive got a TL20/T-12 fluorescent tube that says it draws .37A. The I’ve got a TL20/T-12 fluorescent tube that says it draws .37A.

How many Watts Does a CFL light bulb have?

CFL light bulbs vs LED CFL Light Bulb Wattage LED Equivalent Wattage 22 Watt 12 Watt 15 Watt 9 Watt 9 Watt 5.5 Watt 5 Watt 2 Watt

Can a 100 watt bulb be used in a 60 watt lamp?

So to go back to our original example, to brighten up a room, it would be dangerous to place a 100-watt incandescent into a lamp rated only for 60 watts. However, you could use a 14-watt LED or CFL bulb that’s marked as equivalent to 100 watts, which would give out the same amount of light while staying far below the maximum wattage.