# What is UPS backup time?

Page Contents

## What is UPS backup time?

For devices that consume a high amount of power, this UPS offers a battery backup of around 28 minutes and for low power consuming devices, it can offer a backup for 3 hours continuously. Thus, you can always rely on this backup system.

## What is the backup time of UPS of 1kva?

1 kVA / 900 Watt Power Conditioner, Voltage Regulator, & Battery Backup UPS

Model Number: Description (Under Battery Options Drop Down): Approximate Backup Time At Full Load:
BBP-AR-1000-PSW-ONL-W2EBP UPS Plus 2 Extra External Battery Packs (18 Batteries, 12 Volts, 9 Amp Hours Each) 1.94 KWH 1 Hour 44 Minutes

## How much time UPS will work?

By APC’s own figures, this UPS can run 300 Watts worth of equipment for around four minutes. Even if you can get the load down closers to 150 Watts – perhaps enough to run one PC, a monitor and a some networking gear – you’ll still be lucky to get more than 10 minutes before the UPS runs flat.

## How is UPS shipping calculated?

The Calculate Time and Cost application is located on the Shipping tab of ups.com.

1. From any page on ups.com, select the Shipping tab.
2. Select Calculate Time and Cost.

## How to calculate the UPS battery backup time?

Use this manual / generic battery calculator: calculate the estimated operating time or the battery backup time of any UPS using the load in Watt, device efficiency, number of batteries per strings, strings number and the voltage of the battery capacity.

## How to calculate the run time of a ups?

To calculate the amperage of load (A), re-arranging formula (1) above: A = Wt / V (3) where V = DC battery voltage e.g 12 V The run time of a UPS device is the ratio battery capacity (AH) over total load (A). Time = AH / A (4)

## Where can I find the formula for the UPS battery?

The formula can be found on the label of the lead-acid battery. If you are using the device for a long time through the battery unit, it is recommended to charge the battery regularly.

## How long does a ups last under load?

The total load to be supported by the UPS is the sum of all these individual device power requirements. DC Bus (V) – Is the voltage required by the inverter to operate. DC buses range from 12V (1 x battery) to 180V (40 x batteries). Battery capacity determines how long does a UPS last under load.