How do I change my Bushnell rangefinder from meters to Yards?

How do I change my Bushnell rangefinder from meters to Yards?

The unit of measure indicators are located in the upper right portion of the LCD. To select between yards and meters, look through the monocular, depress the “mode” button (left side of the unit underneath the BUSHNELL YARDAGE PRO logo) and hold it down for approximately 2 seconds.

Is Bushnell Tour V4 Waterproof?

The Tour V4 slope is water-resistant, whereas Bushnell’s other premium rangefinders (Tour X, Pro X7, Pro X7 Jolt, Tour Z6 Jolt) are rainproof or waterproof.

How do I change the settings on my Bushnell Tour v4?

How do I change the settings on my Bushnell rangefinder? To select between yards and meters (starting with unit powered off), press and hold the POWER/FIRE button. After 7 seconds, the display will begin to cycle through the options: Yards or Meters.

How do I change my Bushnell v4 from meters to Yards?

UNIT OF MEASURE OPTIONS While looking through the eyepiece, press and hold the POWER button down for approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the display will toggle back and forth between Yards and Meters.

How do I change the mode on my Bushnell Tour V3?

To save you the frustration, here is how you do it.

  1. Turn off your Tour V3.
  2. When you turn it on again, but this time hold the button down for at least 5 seconds.
  3. The readings should start interchanging between yards and meters. when it shows meter readings, hit the button again to confirm the switch.

How do I change yards to meters on my Bushnell tour?

Same way as you change from yards to meters I believe, on the initial press, just hold it down and look through the eye hole, it’ll shuffle through the options (yards + jolt, yards only, meters + jolt]

Why is my Bushnell rangefinder not showing yardage?

If your Bushnell rangefinder not showing yardage on the screen then try out different environments, figure it needed a calibration adjustment. This is something that the manufacturer recommends doing every year or two as it’s very likely for your device to shift slightly over time due to its sensitive optics.

How big is a Bushnell laser rangefinder?

Your Bushnell® Pro XE is an advanced premium laser rangefinder comprised of digital technology and turbo processors allowing range readings from 5–1300 yards / 5–1189 meters. Measuring 1.5 x 4 x 3 inches, the 8-ounce Pro XE delivers extremely fast acquisition and +/- 1 yard accuracy.

What’s the difference between a Bushnell case and a magnet?

Here are some of the specific details: Improved Case: Bushnell has gone away from the magnetic closure found on pervious cases and moved to a zipper + bungee closure. It’s not a huge change, but I definitely trust the bungee to keep the case closed more than I did the magnet. Plus, who wants magnets next to electronics.