How do I reset my Lexus radio?

How to Reset the Lexus Radio:

1.) Press Menu Button.
2.) Press Radio.
3.) Click on the Presets button if you are on the Radio homescreen.
4.) Tune to the radtio station you would like to save.
5.)

Why is my Lexus radio not working?

The Lexus RX350 radio not working is due to the fuse being bad. If this has been broken then the fuse is no good and will need to be replaced. If this strip is there then the fuse is fine and can be popped back in. New fuses will cost You about 10 dollars, so they are pretty cheap.

Where to find OBD1 code on Lexus SC300?

Transmission must be in Neutral position. All accessories must be turned Off. On pre-OBD II models, turn ignition to On, then use a jumper wire to connect terminals TE1 and El of the data link connector, located under the left hand side of the instrument panel. Codes are indicated by the number of flashes of the check engine warning light.

What happens when a Lexus trouble code is not cleared?

If the diagnostic trouble code is not cleared, it will be retained by the ECU and appear along with a new DTC in future trouble codes. If it is necessary to work on engine components requiring removal of the battery ground cable, confirm no DTC’s are stored.

How can I clear a DTC on my Lexus?

DTC clearing can also be done by removing the battery ground cable, other memory systems (clock) will also be cleared. If the diagnostic trouble code is not cleared, it will be retained by the ECU and appear along with a new DTC in future trouble codes.

Where do I find the OBD code on my car?

Codes are indicated by the number of flashes of the check engine warning light. On models with OBD II, utilize an OBDII scan tool , then connect to data link connector (DLC). Turn ignition and scan tool to On, and write down any codes and “freeze-frame data” that appear. Image used with permission Copyright © 2001 ALLDATA LLC.