Mell How to remove s10 stereo?
Grasp the dash panel around the radio. Pull it sharply to unhook it and access the radio. Remove the two 7 mm bolt-screws from the radio. Pull the radio out.
What size speakers are in a 97 GMC Sierra?
Speakers that fit your 1997 GMC Sierra*
| Speaker location | Speaker sizes** |
|---|---|
| Front Door Tweeters | Tweeter |
| Front Door Woofers | 6-1/2″ |
How many speakers does a 1999 Suburban have?
According to Crutchfield.com, you have 6 3/4″ speakers in the front and rear doors, 4″x10″ in the rear pillars.
What size speakers are in a 1994 GMC Sierra?
Speakers that fit your 1994 GMC Sierra*
| Speaker location | Speaker sizes** |
|---|---|
| Corner Dash | 4×6″ |
| Front Door | 5 1/4″ |
What size speakers are in a 91 Chevy 1500?
The sizes of speakers in a 1991 silverado stepside and were are they… 4×6 in the Dash. Remove Dash Cover to access.
How can I get my GM radio out of my car?
Phoning in for Your Radio Retrieval Code Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Enter the numbers “106010” when prompted for a dealer access code. Punch in your vehicle’s 6-digit radio identification number when instructed. Write down the 4-digit radio retrieval code as it’s recited to you.
How to unlock your Chevy or GMC radio without paying a fee?
Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.
Where is the fuse on a GM Delco Radio?
Open up the fuse box on your GM vehicle (consult your vehicle manual for the exact location). Reading either the fuse diagram label on the fuse box cover or the fuse diagram in the manual locate the fuse for the Delco radio. Pull the fuse from the box, wait 5 minutes (for stored power in the radio to discharge) and re-insert the fuse.
How do you get the radio code on a Chevy?
Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140. Enter 106010 followed by the # key to direct you to the radio code retrieval system. Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.