Mell How much crushed stone do I need calculator?
Formula for Needed Crushed Stone Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need. When using this equation, make sure all of your measurements are in feet.
How much does a yard of 3/8 crushed stone weigh?
One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. Or up to one and a half tons approximately. Generally, a cubic yard of gravel provides enough material to cover a 100-square-foot area with 3 inches of gravel. Keep in mind that some materials compact more than others, so exact coverage may vary.
How much does a yard of crushed stone cover?
Building Stone Calculator
| AGGREGATES FOR GROUND COVER (PER CUBIC YARD) | |
|---|---|
| DEPTH | COVERAGE (STONE SOLD BY THE TON) |
| 1” | 300 SQ/FT PER YARD |
| 2” | 150 SQ/FT PER YARD |
| 3” | 100 SQ/FT PER YARD |
How many cubic feet is a ton of crushed stone?
A ton of gravel with average-sized pebbles is about 0.705 cubic yards, or 19 cubic feet, assuming it has been screened for debris and contains no leftover dirt, sand, etc.
How many inches of stone do I need for a driveway?
According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12.
How many yards of rock are in a ton?
1.13 tons
Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.
How much does cubic yard of crushed stone weigh?
A final calculation is if you need to figure out the weight in tons of your crushed stone. You might not need to figure this out, but it’s handy to know. Most gravel weighs about 1.5 tons per cubic yard. So, for the examples above, 2.45 cubic yards of gravel weighs 3.68 tons or 7,350 pounds.
What’s the best way to measure crushed stone?
Most companies sell their crushed stone by either the cubic yard or the ton. It’s best to figure your needs by the cubic yard and then use one more step to convert to tons. To get to the total volume of crushed stone that you will need, measure the width, length and depth of your project.
What kind of material is crushed stone used for?
Crushed stone is often used as a material for producing concrete. It is also used as a road base, and in some locations it is used for paving roads, for example Russia has over 400,000 km (250,000 mi) of gravel roads. It is a great driveway base material, bike path base fill, paver patio sub base, walkways, and just general fill material.
Where can I find Mulzer Crushed stone calculator?
From driveways to septic system field beds, Mulzer Crushed Stone, Inc. has aggregate products to fit your every need. Use our aggregate calculator to estimate your needs, or contact us at your nearest location.