What should my Serial port config be?

What should my Serial port config be?

Configure the serial port settings

  • Baud rate: 9600 or 115200.
  • Data bits: 8.
  • Stop bits: 1.
  • Parity: None.
  • Flow control: None.

How does HyperTerminal connect to COM port?

How to use HyperTerminal as a Serial Port Monitor

  1. Connect the system you are monitoring to the serial port.
  2. Open the HyperTerminal Software and create a new connection.
  3. Enter a name for your connection and click OK.
  4. Select your COM port under “connect using”.

How do I test a port in HyperTerminal?

Loopback Testing Asynchronous Ports with HyperTerminal Under Microsoft Windows

  1. Choose Start > Accessories > Communications > Hyperterminal.
  2. Type in a name, and choose an icon.
  3. In the Connect using drop down box, choose the com port you wish to test.
  4. Choose the defaults for all port properties.

How do I change my serial port settings?

SOLUTION

  1. Go to Windows Device manager > Multi-port serial adapters.
  2. Select the adapter and right click to open the menu.
  3. Click on the Properties link.
  4. Open the Ports Configuration tab.
  5. Click on the Port Setting button.
  6. Select the Port Number and click OK.
  7. Click OK to apply the changes.

How do I know if HyperTerminal is working?

When using a modem, you can type AT and press [Enter] in the HyperTerminal connection to test communications. You should receive an OK message if your settings are correct and the modem is working, as shown in Figure A.

How do I change COM port settings?

How do I change the port settings on HyperTerminal?

Select your COM port under “connect using”. Click Configure and change the port settings to match the settings required by the device you are connecting to. Click OK Click OK again, and the program will attempt to connect.

How to set up serial terminal in HyperTerminal?

To set up a serial terminal connection in HyperTerminal, First enter a name for your connection, click OK. Select your COM port under “connect using”. Click Configure and change the port settings to match the settings required by the device you are connecting to.

How do I connect my HyperTerminal to my computer?

Open the HyperTerminal Software and create a new connection. Enter a name for your connection and click OK. Select your COM port under “connect using”. Click Configure, and make sure that the port settings match those required by the system you are connecting to. Click OK. Click OK again to connect.

How to create a new connection in HyperTerminal?

If no connection (s) exists, you can click File | New Connection to create a new one. Specify a name for the connection, choose an icon, and click OK. In the Connect To dialog box, choose the COM port being used by your modem (usually COM1 or COM2) from the Connect Using drop-down list and click OK.