How to replace air valve on Benjamin rifle?

A piece that often needs replacing is the air valve seal. To replace it, dismantle the rifle as described in steps 1 and 2. Remove the old fiber gasket you will find on the air valve and replace with the seal provided in the kit. Apply air tool oil to all moving parts and reassemble the rifle.

What to do with a broken Benjamin rifle?

Apply air tool oil to all moving parts and reassemble the rifle. Check a picture of your rifle’s schematics (see Resources) to assess which parts need replacing and how to access them. The kit only comes with one air valve seal. If both seals are damaged, buy two neoprene O-rings of the same size.

Can you use the Benjamin Marauder tune kit?

– Fits all unregulated Marauder and Armada air rifles of any caliber and manufacturing date. These results have been derived by testing with 12 different combinations of Marauder air rifles and pellets. A definite benefit from using the Benjamin Marauder Tune Kit was found every time!

What are the benefits of a Benjamin tune kit?

First, here’s a summary of the benefits that are offered by this Benjamin Marauder Tune Kit. Also included is a sample shot curve for each caliber. Note that all these benefits are compared to “factory tuned” current-manufacture air rifles, direct from the production line.

What do you need to repair an airgun?

The repair kit provides common spare parts you may need to replace. Remove the trigger guard screw and take off the rear part of the stock. Remove the pins and screws that contain the retention cap at the back of the airgun’s receiver. Get the right kit for your model.

How to make a break barrel air rifle more powerful?

You can boost the power your break barrel air rifle has very fast with this simple technique. I show you actual tests and the results. Velocity increase of 60% to 70% is easy, and you can do it. 760 feet per second + can be done using your spring. I had a low of 255 fps which is no power back to 760 fps that is a great speed increase.