Mell What is the maximum cable length for ThinNet coaxial cable?
185 metres
Thin Ethernet (ThinNet) (10BASE2) Uses “Thin“ coax cable (RG58A/U or RG58C/U). The maximum length of one segment is 185 metres. The maximum number of segments is five. The maximum total length of all segments is 925 metres.
What is the maximum cable length for ThinNet 10Base2 coaxial cable?
185 meters
ThinNet uses BNC connectors attached to a thin coaxial cable. The maximum segment length of 10Base2 is 185 meters, and the maximum number of devices per segment is 30.
Is a coaxial cable used in networks operating at 10Mbps with a maximum length of 185 meters?
Explanation: Thicknet is a coaxial cable used in networks operating at 10mbps, with a maximum length of 500 meters.
Do different coax cables make a difference?
Most coaxial cables include both (although some RG 59 cables still use single shielding). In general, the more shielding you have, the better your cable will perform, especially in longer runs, but there are differences in what the shields protect.
Which device is used to extend the 10Base2 network beyond the maximum distance?
10Base2 networks are wired together in a bus topology, in which individual stations (computers) are connected directly to one long cable. The maximum length of any particular segment of a 10Base2 network is 185 meters. If distances longer than this are required, two or more segments must be connected using repeaters.
What is the length of a thinnet coaxial cable?
Thinnet is a flexible coaxial cable about ¼ inch thick. Thinnet is used for short-distance. Thinnet connects directly to a workstation’s network adapter card using a British Naval Connector (BNC). The maximum length of thinnet is 185 meters.
What is the impedance of a thinnet Ethernet cable?
Thinnet – Ethernet systems using thinner coaxial cable RG58/U that is 0.2 inch in diameter and has an impedance of 50 ohms are referred to as Thinnet or 10Base2. Here 2 represents the maximum distance of 200 meters recommended between nodes/repeaters.
What’s the maximum distance for an Ethernet cable?
For information on audio/video cable distance limits, click here. There are a few different versions of ethernet cable, but they all have a maximum distance of 100 meters (328 feet). It should be noted that Cat7 cable has harsher distance limits than Cat5e, Cat6, and Cat6a.
What’s the difference between a thinnet and a base cable?
Here 10 means 10Mbps speed that this cable can offer, Base means baseband, and 5 represents the maximum distance 500 meters recommended between nodes/repeaters. Thinnet – Ethernet systems using thinner coaxial cable RG58/U that is 0.2 inch in diameter and has an impedance of 50 ohms are referred to as Thinnet or 10Base2.
Thinnet is a flexible coaxial cable about ¼ inch thick. Thinnet is used for short-distance. Thinnet connects directly to a workstation’s network adapter card using a British Naval Connector (BNC). The maximum length of thinnet is 185 meters.
What is the maximum bandwidth of a coaxial cable?
Coaxial cables don’t have a maximum speed. It’s just a physical carrier. It depends on the technology behind the cable that gives it its speed. What Google told you was that the DS3/T-3 communication has a maximum speed of 44.736Mbps, but it uses a coaxial cable as the carrier.
Thinnet – Ethernet systems using thinner coaxial cable RG58/U that is 0.2 inch in diameter and has an impedance of 50 ohms are referred to as Thinnet or 10Base2. Here 2 represents the maximum distance of 200 meters recommended between nodes/repeaters.
What’s the difference between thicknet and thinnet Ethernet?
Thicknet – Ethernet-based LANs using thick cable RG8/U cable that is 0.4 inch in diameter for internet-connection are referred to as Thicknet or10Base5 systems. Here 10 means 10Mbps speed that this cable can offer, Base means baseband, and 5 represents the maximum distance 500 meters recommended between nodes/repeaters.