Mell What are the common problems with scope mounting?
Canted or improperly focused reticles and the wrong eye relief were other common problems, but they are topics for future columns. Too-tight screws and out-of-whack rings and bases are two problems that, left uncorrected, could cause you grief, possibly ruin a good scope, and maybe even ruin a great hunt.
What to do if your scope is snapped?
Stripped or snapped screw heads are a huge hassle, especially to gun-store clerks, and overtightening will likely lead to a damaged scope or mounting system. This problem can be solved with an instruction manual, torque wrench, the right bit, and thread-locking compound, according to David Turner, president of Talley Manufacturing.
What should I do if my scope is misaligned?
In some rare cases, a little metal needs to come off if the bases are slightly misaligned or the ring tolerances are stacked in opposite directions. A set of ring-alignment tools–two pointed tubes the diameter of the scope body–will reveal any problems. If the tool indicates drastic misalignment, rotate the rings 180 degrees.
What’s the best way to mount a scope?
With the lapping compound cleaned away, the scope should slide between loose rings without binding or grinding. If it still sticks or grinds, apply more compound and make a few more passes. Some kit instructions recommend removing 60 to 80 percent of the rings’ interior finish.
What happens if you snap a scope head?
More often than not, the screw suffers a terrible fate and is mangled beyond repair. Stripped or snapped screw heads are a huge hassle, especially to gun-store clerks, and overtightening will likely lead to a damaged scope or mounting system.
Do you tighten the screws on a scope?
Always tighten base and ring screws to the manufacturer’s specs. Overtightening can damage the scope body and affect performance.
What should I do if my scope is wrong?
A set of ring-alignment tools–two pointed tubes the diameter of the scope body–will reveal any problems. If the tool indicates drastic misalignment, rotate the rings 180 degrees. If things still look bad, it might be time to try a new set of rings and bases or windage-adjustable bases.
What are the most common problems with riflescopes?
1. Scope shift This is one of the most problems that many people experience when using rifle scopes. Scope shift which is also known as the point of impact takes place when you are aiming or sighting the point where the bullet will hit. If you notice that there is a variation, then scope shift has taken place.