When I plug in my memory stick nothing happens?

Reasons why your computer isn’t recognizing your USB device include: There is a problem with the USB driver. The USB drive isn’t properly formatted. The USB drive is dead.

How do I fix an unrecognized USB?

Resolution 4 – Reinstall USB controllers

Select Start, then type device manager in the Search box, and then select Device Manager.
Expand Universal Serial Bus controllers. Press and hold (or right-click) a device and select Uninstall.
Once complete, restart your computer. Your USB controllers will automatically install.

How do I make my TV USB readable?

To format a USB stick to FAT with Mac OS:

Connect the USB Device to the computer.
Open Disk Utility.
Click to select the USB Device in the left panel.
Click to change to the Erase tab.
In the Volume Format: selection box, click MS-DOS File System.
Click Erase button.
At the confirmation dialog, click the Erase button.

What happens when I plug in a USB drive?

USB drives do get damaged a factor that can be problematic especially when the drive has important data. It is especially problematic when the PC can’t detect the device since you are unable to access the files in any way. But the solutions above should be able to help you fix the USB drive and get the device working normally again.

Why does my computer say nothing when I plug in a flash drive?

If nothing happens when plug in your USB flash drive through the USB port on a Windows PC/laptop, you need professional help. This article provides you with easy and clear steps to make your computer recognize the USB device properly.

Why is my USB hard drive not connected?

When you get Error Message: “ The USB storage device is not connected “, one of the following might cause it: Defective USB Storage Device. | Usually the hard drive itself is fine, but the USB bridge that helps connecting the USB cable to the SATA interface of the hard drive is out of action.

Why does my computer not recognize new USB devices?

When I plug new USB devices in my computer does not recognize them unless I restart the computer. How do I fix this? Try this… 1. Go to “Control Panel” and then “Device Manager”. 2. Expand the “Universal Serial Bus controllers” section. 3. Double-click on the “USB Root Hub device”. 4. Now click the “Power Management” tab. 5.