Can you change the direction a refrigerator door opens?

Can you change the direction a refrigerator door opens?

Door handles can easily be reversed on almost any refrigerator door by removing a few screws and bolts —but keep track of the parts and the assembly order.

Are fridge doors reversible?

Most Refrigerator Doors Are Reversible Unless the refrigerator has a built-in water or ice dispenser in it or a through-the-door unit, the door is probably reversible. It’s important to remember that your refrigerator door can be reversed at any time.

How do you change a refrigerator door handle to the other side?

Start with the fridge door and unscrew the bottom hinge housing. Use the bottom hinge housing which was supplied in the plastic bag with the appliance, and screw it into the opposite side. Remove the top hinge housing and reposition it into the opposite side. Repeat this for the top hinge housing of the freezer door.

Is it easy to change the way a door opens?

All you need to do is cut door hinge mortises on the opposite side of the door jamb and reverse the striker plate hole. It’s not as complicated as it sounds. To keep the door swinging in the right direction you don’t need to change the doorstop. Just change it from left- to right-hand swing or vice versa.

Which side should a refrigerator open?

Today’s refrigerators include many models with a single door on a single set of hinges. These refrigerator doors can be hinged on the left or right side: A right-hand refrigerator opens left-to-right with door hinges on the right, while a left-hand refrigerator opens right-to-left with door hinges on the left.

How do you change the handle on a Kenmore refrigerator?

First, line the bottom of the new handle with the door’s locking tab. Slide the handle to the left to lock it. Next, rotate the top of the handle clockwise over the corner of the door and into position.

How can I change the side of my Refrigerator Door?

On the very top of the fridge, above the freezer door (you may need a stepladder) remove the two torx screws (using a torx driver, just a few dollars from local hardware store). from the freezer door. These will be in the hinge plate (hinge side of fridge). Remove the top hinge plate.

How do you remove a refrigerator door handle?

Tilt the upper door away from the fridge and lift it up and off the middle hinge pin. Immediately check for a plastic washer or guide that fits into the bottom of the upper door. Locate those parts and put them in a safe place. Unsnap the plastic “vanity” plugs that cover the door handle screws.

What happens when you flip a refrigerator door to the opposite side?

Swap the door handles and the door stops to the opposite sides of the door (Photo 2). This next part makes most people crazy, but it makes sense when you think it through. When you flip the middle hinge to the opposite side of the fridge, the upper and lower hinge pins will be facing the wrong direction.