Mell Can a bent rifle barrel Be Fixed?
Rifle barrel straightening is not something that a casual hobbyist or even most professional gunshops can do effectively. Even the rifle barrel factories are “iffy” on their ability to straighten factory barrels.
What happens if a gun barrel is bent?
A bent barrel provides an unbalanced force which will cause the bullet to try to change direction (resulting in heat and loss of velocity). Too much of a bend, the bullet will cause wear at the location of the bend due to friction. Too much bend and the barrel will go boom.
What is the rarest M1 Carbine?
It appears to be the 239 Commercial Controls M1 Carbines were assembled from leftover parts. The second quality parts were included to meet huge demands of U.S. Army in August 1945. Since the defective ones are generally dumped, these Commercial Controls M1 Carbines are the rarest.
How reliable is the M1 Carbine?
If you’ve got an M1 Carbine that has one malfunction every thousand rounds or so, that’s pretty good. That’s well above average for a gun from that era. It’s a design that can be reliable, but I don’t think it takes a whole lot for it to become unreliable.
Can you straighten a bent shotgun barrel?
Yes, a bent barrel can be straightened,IF it is not too crooked, because when it is straightened it will leave a crease in the bbl. The smith will put the barrel in a fixture and straighten it.
Can a gunsmith straighten a barrel?
Yes, if the person doing the straightening knows what he is doing. All new cut rifling barrels are checked for straightness, and straightened if necessary after rifling at the factories.
Can a bullet go through a bent barrel?
It just doesn’t work very well. Alternative ways of firing around corners have been developed, instead of trying to use a curved barrel they tend to poke the whole weapon around the corner. Now, if you’re talking about firing through a barrel that started life straight and got bent, just don’t.
Can a gun barrel be curved?
No, absolutely not. Bending a barrel by hand would require a Superman-caliber feat of strength, and even then it would probably leave a dangerous crimp or pinch in the barrel that would result in a nastier outcome than demonstrated here.
What is the most sought after M1 carbine?
Original, “as built” condition Rock-Ola’s and Saginaw/Irwin Peterson tend to be the highest valued basic M1 Carbines. The much rarer UN-Quality and virtually non existent Commercial Contols M1 Carbines tend to be auction pieces where just about anything is possible.
Is it bad to dry fire M1 Carbine?
Dry firing an M-1 will do no harm. Your average M1 has been dry fired a bazillion times by recruits over the years, and survived that just fine.
How often should I clean my M1 Carbine?
We recommend cleaning every 500 rounds fired or when the rifle is not going to be in service for more than a week. Do not remove the gas cylinder from the barrel if possible. Doing so will hurt the accuracy potential of the rifle. The gas cylinder can be cleaned with the rifle assembled.
https://www.youtube.com/watch?v=5i75lpSZgtQ