When did the Smith and Wesson Model 66 come out?
Introduced in 1972, the Model 66 is a K-framed six shot .357 Magnum revolver. It is a stainless steel version of the Model 19 and was initially available with a 4″ and 6″ barrel.
What’s the serial number on a Smith and Wesson?
Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup. For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1 1952 = 7369 – 21342 1953 = 28916 1955 = 55050 – 75000 1957 = 117770 – 125000 1962 = starts at 295000 1969 = ends at 786544 J serial Prefix serial numbers. For models 36, 37, 38, 49, 50.
Where are the Smith and Wesson guns made?
Location: Springfield, Massachusetts Since 1857 Smith & Wesson has staked its headquarters in Springfield, Massachusetts with manufacturing operations in Holton, Maine and other operations in Columbia, Missouri. Partnership with Horace Smith & Daniel B. Wesson was from 1856–1874. Family owned by the Wesson Family from 1874–1965.
When did the Smith and Wesson K frame come out?
The K-Frame revolver is one of the most important innovations in Smith & Wesson history and was built specifically to handle the .38 S&W Special cartridge. Since its introduction in 1899, the K-Frame has been a favorite for military and police professionals as well as target shooters and enthusiasts.
What was the Smith and Wesson Model 686 Magnum?
During the 1980s, Smith & Wesson developed its L-Frame line of .357 Magnums: the Model 581, Model 586, Model 681 and Model 686. The Models 581 and 681 have fixed sights, whereas the 586 and 686 use adjustable sights.
Can a.357 Magnum be fired with a 686?
It will chamber and fire .38 Special cartridges, as the .357 Magnum was developed from the .38 Special. The magnum case is slightly longer to prevent magnum rounds from being chambered and fired in handguns chambered for the .38 Special. The 686 has been available with 2-1/2 in.
What kind of Magnum is a Smith and Wesson K frame?
Today’s K-Frame is available in .22 LR, .357 Magnum and .38 S&W Special. ALL BACKED BY OUR SMITH & WESSON LIFETIME SERVICE POLICY.
Is the Smith and Wesson Model 66 357 Magnum stainless combat?
Smith & Wesson Model 66 357 Magnum Stainless Combat Revolver, first engineering change (66-1), with factory original box, paperwork, original grips, screwdriver, and ammo. It’s always nice to have original “stuff” such as this factory box in which the 66-1 was originally purchased.
What’s the price of a new Smith and Wesson?
New Sold  NEW SMITH AND WESSON MODEL 66 PRICE. .357 Mag. Smith & Wesson S&W Model 66 Stainless Revolver 357MAG 357 Magnum 162662 6RD 022188626629 4 inch ” barrel. PRICE: $959.99.
Which is the 50th anniversary Smith and Wesson?
“Smith & Wesson 27-3 .357 Magnum caliber revolver. 50th Anniversary Commemorative beautiful 5″ blue model with smooth presentation grips. Has special anniversary markings. Only 2500 made in …Click for more info 1 OF 100 STATE OF INDIANA SMITH & WESSON 686, 357 MAGNUM STAINLESS, 4” BARREL, LIMITED EDITION C.1986 UNFIRED.
What kind of Guns does Smith and Wesson have?
Our inventory consists of pistols, revolvers, and rifles of all kinds, including the popular Model 10, Model 29, M&P Shield, M&P 2.0, M&P Sport, and the M&P 15. Whether you’re shopping for home defense, hunting, or anything in between, we offer Smith & Wesson models for every purpose.
Where can I find the serial number on a Smith and Wesson pistol?
Look up the pistol’s full serial number — including all letters and numbers — in the back section of the “Standard Catalog of Smith & Wesson” book. These listings inform you of the pistol’s date of manufacture, based on the serial number.
When was the first Smith and Wesson made?
Patent dates are, March 7, 1894, May 21, 1895, August 4,1895, Dec. 22, 1895, October, 1901, and Feb. 06, 1906. Serial # 15563.
When does Smith and Wesson 4th edition come out?
The estimates found in the Standard Catalog of Smith & Wesson are as close as possible with the information that we have. The Standard Catalog of S&W 4th edition is at the Printer now and we expect that it will be available by October. It is definitely worth the price.
What’s the serial number on an S & W Model 66?
66-2 (1982): Eliminated pinned and recessed, slightly lengthened cylinder. 66-3 (1986): New yoke retention system/radius stud package/hammer nose bushing/floating hand. 66-4 (1994): Change rear sight leaf, drill and tap frame, introduce Uncle Mike’s grips, change extractor.
What kind of Dash does a Model 66 have?
So what is this rogue S&W Model 66 no dash with the front and rear looking sights of an S&W Model 66-1 without the changed gas ring from the yoke to the cylinder? Or is it actually an S&W Model 66-1 that does not have the -1 on it?
What’s the lock up on the S & W 66-8?
The new lockup for the S&W 66-8 omits the locking bolt in the barrel shroud (left) in favor of a ball detent on the frame that locks into the crane/yoke (right). Just above that area, you can find a second design improvement.
How big is the barrel on a Model 66?
Like most revolvers at the time, the Model 66 was usually found with a 4-inch barrel although 6-inch and 2 ½-inch models were in regular production as well. There were also some limited runs of a 3-inch model offered sporadically over the years, and that’s my favorite version of the 66.
When was the Combat Magnum Model 19 made?
It was first introduced in 1970 as a stainless steel alternative to the original blued-steel Combat Magnum, the Model 19. Both were extremely popular police sidearms through the last few decades of the 20th century.
How to identify a s and W revolver and when was it made?
Many people have questions about how to identify a S&W revolver and when was it made. I borrowed this from a thread on Highroad.org forum. It has a lot of info that might be of interest to many of you. This is where to look for the model number (not used until around 1957). Sometimes the serial number is here, especially in later models.
What’s the price of a Smith and Wesson revolver?
Smith & Wesson Handgun- 38-44 Heavy Duty, 38 spl., made between 1950 & 1966, Pre Model 20. Serial Number:S149xxx… (Full Details) Price: $1,195.00 Smith & Wesson Handgun- Revolver, 38 S&W Spl., 6 1/2 inch barrel, Target Model, made in 1931-1941, 4761 made. Serial Number:40xxx… (Full Details) Price: $1,395.00
What’s the price of a Smith and Wesson 60?
357 Mag. Smith & Wesson S&W Model 60 LS Revolver LADYSMITH 357 MAGNUM 357MAG 162414 022188624144 2 inch ” barrel PRICE: $749.99 MANUFACTURER: Smith & Wesson
When was the first S & W revolver made?
Pre-War N frame. *Note that a number of N frames with serials in the S138000-S140000 range (and the range may be wider either way) are seen that were shipped much later than the serial would suggest should be the case. In one known example a gun with serial S136431 was not shipped until June of 1958.
What makes the Smith and wesson.357 Magnum so collectable?
The classic Smith & Wesson .357 Magnum is a stunning piece with an intriguing history, and it’s still a very popular item with collectors. What makes the Smith & Wesson .357 Magnum so collectable? Introduced in 1935 and built on the large N-Frame, Smith & Wesson’s .357 Magnum was a classic revolver.
Which is the most collectible Smith and Wesson revolver?
The Registered .357 Magnum models are the most collectible of all Smith & Wesson revolvers today, and there is nothing to indicate that this is likely to change in the near future. Non-Registered .357 Magnums are also very much sought after by collectors, in part because fewer of them were made.
How to date a Smith and Wesson revolver?
For the exact date on your gun request the letter from S&W Historian Roy Jinks. Pre-War N frame. *Note that a number of N frames with serials in the S138000-S140000 range (and the range may be wider either way) are seen that were shipped much later than the serial would suggest should be the case.
Where was the first Smith and Wesson pistol made?
By Christopher John. The Smith & Wesson company was formed in 1852, in Norwich, Connecticut. The company’s first offering was a lever-action repeating pistol.
When was the Smith and Wesson 32 made?
The same holds true for .32 S&W. Around 1909, S&W published a statement that all its BP guns could safely shoot commercial smokeless cartridges. Those are some nice old 38s. I have several 38 and 32s top break, SA, DA and Safety hammerless models, and enjoy shooting them on occasion. The only one I’m missing is a 38 DA but I’m still looking.
Which is the rarest model of Smith and Wesson?
A rare S&W M19-3 was built for the French GIGN. In 1972 they ordered 500 of these revolvers that have serial numbers in the M&P range from D639300 to 639800. With only 500 guns produced, this is the rarest M19 version. This specific model 19-3 has a fixed sight and is pinned & recessed. It has a three inch barrel. Styles
When was the first Smith and Wesson Model 19 made?
The Model 19 was produced from 1957 (first model number stampings) to November 1999. The Model 66 was produced from 1970 until 2005. The Model 66 differed by its use of stainless steel and its smooth target-type trigger.
Can a serial number on a Smith and Wesson be off?
There is some dispute regarding the dates on some serial numbers and your gun may actually be a year off from what is listed. The precise shipping date as “lettered” can be several years off depending on model. For the exact date on your gun request the letter from S&W Historian Roy Jinks.
How much does a Smith and Wesson 357 Magnum cost?
357 Mag. SMITH & WESSON MODEL 66 STAINLESS ENGRAVED 357 MAGNUM 4 inch ” barrel PRICE: $1,850.00 MANUFACTURER: Smith & Wesson
How to identify the date of manufacture on Smith and Wesson pistols?
How to Identify the Date of Manufacture on Smith & Wesson Pistols. The Smith & Wesson company was formed in 1852, in Norwich, Connecticut. The company’s first offering was a lever-action repeating pistol. Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns.
How many Smith and Wesson handguns are there?
Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns. As of March 2011, Smith & Wesson offers approximately 110 different pistols of varied designs and features.
What was the first Smith and Wesson revolver?
The Smith & Wesson Model 29 was one of the first revolvers chambered for the powerful .44 Magnum round. A blued, six cylinder revolver with wooden grips and a classic style, the Model 29 became particularly popular after its use in the “Dirty Harry” series of films.
How big is the barrel on a Smith and Wesson 66 357 Magnum?
Aside from the 2.5- and 4-inch barrels, the factory also offered 3- and 6-inch barrel lengths over the years. Interestingly, these two revolvers are alike in many ways, but the stumpy 66-2 has a smooth trigger, while the 66-1 has vertical grooves on the face of its trigger.
What’s the weight of a Model 66 Magnum?
Over the years the stainless-steel K-Frame Model 66 has been offered with 2.5-, 3.0-, 4.0-, and 6.0-inch barrels, with weights ranging from 31 to 40 ounces. They were hugely popular with both lawmen and sportsmen. In 2014 S&W redesigned the Model 66 to incorporate a two-piece barrel setup.
Who are the owners of Smith and Wesson?
Family owned by the Wesson Family from 1874–1965. Smith & Wesson became a subsidiary of Bangor-Punta from 1965–1983. Between 1983–1987, Smith & Wesson was owned by the Lear Siegler Co. On May 22, 1987, it was sold to R.L.Tomkins, a British holding company.
How to get Smith and Wesson owner’s manual?
Please contact our customer support representatives for the most up to date information at 1-800-331-0852 Ext. 2904 8:00 a.m. to 8:00 p.m. Eastern Standard Time, Monday – Friday
What are the parts of a Smith and Wesson revolver?
Smith and Wesson Revolver Firing Pins Smith and Wesson Revolver Full Moon Clips Smith and Wesson Sights Smith and Wesson Revolver Springs Hyskore’s GripLight
What is the Smith and Wesson Model No.44 Magnum?
SMITH AND WESSON .44 MAGNUM MODEL NO. 629 STAINLESS REVOLVER MANUAL This is a owners guide/manual that covers the. 44 MAGNUM Caliber SMITH AND WESSON MODEL NO. 629 STAINLESS REVOLVER. Date not found, part number on back is 05130. It is four page then tri folded.
Is the model 66-2 a k or L frame?
The 66-2 is a K Frame revolver the 66-2 production change started in 1977 through 1982, when the Dash 3 model was introduced. The K and L frames grips will work. You will need to know if your Model 66-2 has a a Round Butt Frame or Square. Pictures of both are on Hogue’s Website. K or L Frame Revolvers : Hogue Inc.,
How much does a Smith and Wesson Magnum cost?
357 Mag. Smith & Wesson S&W Model 66-3 Magnum 6″ Stainless BOXED LFF 6 inch ” barrel PRICE: $1,801.01 MANUFACTURER: Smith & Wesson
When did the model 66-2 Dash 3 come out?
The 66-2 is a K Frame revolver the 66-2 production change started in 1977 through 1982, when the Dash 3 model was introduced. The K and L frames grips will work. You will need to know if your Model 66-2 has a a Round Butt Frame or Square.