How to remove the dashboard on a 2000 Dodge Ram 1500?

Use a flathead screwdriver to pry off the metal clips that are retaining the edge of the dash to your Ram. Once you have disengaged all the clips around the edge of the dashboard, the dash can be lifted out. Pull up on the dashboard to remove it from the Ram and lift it out of the car.

How do you remove the dashboard on a Dodge Ram 1500?

How to Remove the Dash on a Dodge RAM

Remove the rubber liner around the cup holders along with the plastic tray on the driver’s side of the center console.
Locate the three screws that are used to secure the console to the floor and remove them with the screwdriver.
Pull the floor console out and set it aside.

How do you remove the dash on a 2001 Dodge Ram 1500?

How to Remove the Dash Bezel From a 2001 Dodge Ram 1500

Turn the engine off. Depress the steering wheel tilt lever and lower the steering wheel.
Grasp the dash bezel on the left side, above the steering column.
Grasp the right side of the dash bezel, above the radio.
Lift the dash bezel over the steering wheel.

Why do Dodge dashboards crack?

The plastic they used was too hard and brittle. The trucks drive like typical trucks and this cause the dash boards to crack when they are bouncing down the road, or truck trail. Sometimes the sun helps accelerate this damage.

How do you remove the dash on a 2006 Dodge Ram 1500?

How to Remove the Dash From the 2006 Dodge

Examine the dash panel. Find gaps in the finish of the dash.
Gently place the flat-head screwdriver into the gaps between the dash and the body. Pry back the dash panel slowly — do this every 1 or 2 inches on the dash until the dash is loose.

How do you remove the dash on a 2007 Dodge Ram?

How to Remove the Dash From a 2007 Dodge

Open the hood of your 2007 Dodge.
Locate the mounting screws on the glove compartment, and remove them with a Phillips screwdriver.
Remove the rest of the screws from the lower dashboard.
Remove the screws from the bezel around the instrument panel using a Phillips screwdriver.

Is a cracked dashboard bad?

The dash is more likely to splinter in unplanned and potentially dangerous directions during deployment of the airbag. As a result of the Cracked Dashboard Problem, the dashboard portion is more susceptible to shattering, which creates the potential for bodily harm from shrapnel during impact.

How long does it take to replace a heater core in a Dodge Ram?

1-12 hours depending on the car!

How do you remove the shift knob on a Dodge Ram?

How to Remove a Dodge 1500 Shift Knob

Carefully stick the blade of a small flat-head screwdriver under the circular plate on the top of the shift knob.
Lift the plate completely off of the knob and set it aside.
Use a socket wrench to remove the lock nut underneath the removable plate.

How do you remove the dash from a Dodge Ram?

When to replace the dashboard on a Dodge Ram?

There have many complaints of second generation Dodge Ram dashboards breaking after only a couple years of use. If you find that the dashboard on your Ram is cracking or breaking, you should remove it and replace it with a new one. Removing the Ram’s dash if actually fairly simple and takes no more than 15 minutes.

What should I do if the dashboard on my Ram broke?

If you find that the dashboard on your Ram is cracking or breaking, you should remove it and replace it with a new one. Removing the Ram’s dash if actually fairly simple and takes no more than 15 minutes. Turn the engine of the Ram off and open the hood. Use a socket wrench to unplug the Ram’s battery by removing its negative cable.

Is there a replacement dash cap for a 2000 Dodge Ram?

As an inexpensive replacement option for… Dodge Ram 1500 / 2500 / 3500 2000, Dash Cap by Replace®. Manufactured from materials of exceptional quality, this product provides extra durability for long-lasting service life. As an inexpensive replacement option for your rebuild,…