When was the Stevens Model 520 shotgun made?
This article relies too much on references to primary sources. The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916.
When did the Stevens Model 620 go out of production?
Stevens also further modified the design when they introduced the streamlined Model 620 in 1927. The Model 620 was internally similar to the Model 520 and was produced until 1939 when it was replaced by the Model 620A which ended production in 1955.
Are there different types of Stevens Model 522 trap guns?
There were other models including a Model 522 trap gun and the 525, 530, and 535 with increasing levels of engraving and stock quality (some straight grip) and fore grips. Internally there is an inertial slide release block that is affixed to the inside of the receiver.
What’s the difference between the Stevens 520 and 620?
Savage (which had become Stevens’ parent company) was keenly aware the 520 was pug-ugly so the company rolled out the Stevens Model 620. Identical to the 520 internally, it differed only by virtue of a more “modern,” rounded profile to the receiver.
The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. Stevens was sold to New England Westinghouse on 28 May 1915 and production of civilian firearms was greatly reduced.
The Model 620 was internally similar to the Model 520 and was produced until 1939 when it was replaced by the Model 620A which ended production in 1955. This shotgun is a hammerless, pump action, take-down design with a tubular magazine which holds 5 shells.
When did John Browning patent the Stevens shotgun?
John Browning filed a patent for a “hammerless” shotgun with a unique take-down barrel and locking breech block on 10 Jul 1903, it was approved on 7 Feb 1905 and along with a separate 27 Aug 1907 patent, that applied to the connection between the slide arm and the fore end, became what would be the Stevens.
When did the Stevens Model 620A come out?
Initially the 620 was only offerd in 12 gauge but a 16 gauge followed in 1928 and a 20 gauge was introduced in 1930. The Model 620A began production in 1940. The main difference between the 620 and the 620A was how the stock attaches.
Where is j.stevens arms and Tool Company?
STEVENS ARMS CO., J. Location: Chicopee Falls, Massachusetts. In 1864, this firm began doing business as J. Stevens & Company. In 1888, it was incorporated as J. Stevens Arms & Tool Company. It operated as such until 1920, when it was taken over by Savage Arms Company. It has operated as an independent division in this organization since.
What are the markings on a J Stevens trench gun?
Model 520-30 trench gun barrels are marked “Proof Tested–12 Gauge –2 3/4 Inch Chamber–” on the left side and have another small “P” and ordnance bomb and the “J Stevens Arms Company” address on the right side of the barrel. This was done so that all the markings could be read with the heat shield installed.
What was the first shotgun made by Stevens Arms?
Starting in 1872, Stevens began producing single-barreled shotguns based on their tip-up rifles and pistols. The first was the Model 30 offered in 14 gauge but soon followed by 10, 12, 16, and 20 gauges.
How many Model 520 30 shotguns were made?
Total wartime production of all Model 520-30 shotguns was 33,306 and all Model 620 shotguns were 12,174. After the war, the US military standardized both the Model 520-30 and the Model 620 and kept them in the inventory. They were used in the Korean War and as late as the Vietnam War.
When did the Savage Arms Model 520 come out?
It had a unique two piece heat shield/bayonet lug. When Savage Arms purchased Stevens in 1920, the Model 520 was updated incorporating several design changes that were emerging prior to 1916.
What kind of guns did Stevens make in World War 2?
During World War II, Stevens began producing both the Model 520A (renamed the Model 520-30) and the Model 620A (labeled as the Model 620) as trench guns, riot guns, and long-barreled training guns for the US military.
Where is the slide release on the J Stevens 520?
The J. Stevens Arms and Tool Co. changed names in 1920. This one appears to be an early 520. The slide release is on the side of the receiver, instead of behind the trigger guard. It’s turning into a fun project researching this. The gun was given to my dad when he was a young man because of a problem.
Where can I buy a J Stevens shotgun?
J. STEVENS Mod 335 12ga sxs NO SALES TO CALIFORNIA or ILLINOIS $560 + The actual shipping and insurance charges to your FFL LICENSE DEALER. Gun is in VERY GOOD shape, bo …Click for more info STEVENS MARKSMAN #12 SBL. SHOTGUN #348 STEVENS MARKSMAN #12 SBL.
When did the Stevens Model 15 rifle come out?
First published in the Spring 1938 Sears & Roebuck Catalog, it was originally priced at $3.19. The Model 15 was intended for the boy’s rifle market and was favored for use by the Boy Scouts of America. Most of the Stevens Model 15s had a 22 in. barrel and an overall length of 37 in.