When did the Smith and Wesson 38 Special come out?
Most of the early M&P revolvers chambered in .38 Special appear to have been sold to the civilian market. By 1904, S&W was offering the .38 M&P with a rounded or square butt, and 4-, 5-, and 6.5-inch barrels. Smith & Wesson 1905 4th change 1915 Target model. “NRA” Slow Fire at 25 yards.
Is the.38 s and W still in use?
Whether as issued or rebuilt for post-war use, these guns will handle any published load for the .38 S&W and can be expected to give continued faithful service to the shooter. The S&W Victory Model is the author’s choice of test guns if wanting to handload the .38 S&W to its (safe) potential.
What’s the difference between A.38 special and a 38 Special?
Because the .38 Special cartridge is longer but not quite as “fat” as the .38 Smith & Wesson, cases fired in these modified chambers tend to show a characteristic bulge in the middle.
Is the Smith and Wesson 438 in good condition?
Iver Johnson MODEL HAMMERLESS SAFETY DOUBLE ACTION REVOLVER, US, CIRCA 1893-1950, .38 – .38 Special BuyItNow! Smith & Wesson 438 in good used condition – .38 Special BuyItNow! Smith & Wesson 642 in great condition with blue box and everything it came with.
What kind of bullet is A.38’s and W?
MKE 9.65 mm Normal (9.2×23mmR (.38 Smith & Wesson)) cartridge has a 177 gr (11.5 g) lead-antimony alloy bullet with a gilding-metal full metal jacket and a Boxer-primed brass case. The “normal” designation differentiates it from their 9.65mm Special (9.1×29mmR (.38 Special)) round.
What’s the muzzle velocity of A.38 special?
The “Normal” designation differentiates it from their 9.65mm Special (9.1×29mmR (.38 Special)) round. It uses the 9.65 mm (.38-caliber) nominal bore rather than its 9.2 mm (.361-caliber) actual bore. It has a muzzle velocity of 590 ft/s (180 m/s).
What was the name of the Colt 38 S and W?
The .38 Colt New Police was Colt’s Manufacturing Company’s proprietary name for what was essentially the .38 S&W with a flat-nosed bullet.
This cartridge was called the .38 S&W Super Police or the .38/200. Britain would later adopt the .38/200 as its standard military handgun cartridge. In 1930, Smith & Wesson introduced a large frame .38 Special revolver with a 5-inch barrel and fixed sights intended for police use, the Smith & Wesson .38/44 Heavy Duty.
What kind of round is Smith and Wesson Special?
38 Smith & Wesson Special, also commonly known as .38 S&W Special, .38 Special, .38 Spl, .38 Spc, (pronounced “thirty-eight special”), or 9x29mmR is a rimmed, centerfire cartridge designed by Smith & Wesson. It is most commonly used in revolvers, although some semi-automatic pistols and carbines also use this round.
How big is the barrel on A.38 special?
Smith & Wesson makes .38 Special revolvers. The .38 Special CTG revolver is a six-shooter with a 6-inch barrel.
What’s the serial number on a Smith and Wesson?
Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup. For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1 1952 = 7369 – 21342 1953 = 28916 1955 = 55050 – 75000 1957 = 117770 – 125000 1962 = starts at 295000 1969 = ends at 786544 J serial Prefix serial numbers. For models 36, 37, 38, 49, 50.
When was the second model Smith and Wesson made?
In 1902 the .38 Military & Police (2nd Model) was introduced, featuring substantial changes. These included major modification and simplification of the internal lockwork and the addition of a locking underlug on the barrel to engage the previously free-standing ejector rod.
What was the name of the Smith and Wesson Model 10 revolver?
They were sent to Canada as well. The S&W Model 10 revolver was a popular weapon before the semi-automatic pistol replaced the revolver in many police departments, as well as police units and armies. Certain units of the Ireland’s Gardaí (Irish Police) had replaced the Model 10 by the SIG Sauer P226 and Walther P99 C semi-automatic pistols.
What was the serial number of the first Smith and Wesson?
Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in .38 Special appear to have been sold to the civilian market. By 1904, S&W was offering the .38 M&P with a rounded or square butt, and 4-, 5-, and 6.5-inch barrels.
In 1930, Smith & Wesson introduced a large frame .38 Special revolver with a 5-inch barrel and fixed sights intended for police use, the Smith & Wesson .38/44 Heavy Duty.
Is the.38 special the same as the.357 Magnum?
Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum. This allows the .38 Special round to be safely fired in revolvers chambered for the .357 Magnum, and the .38 Long Colt in revolvers chambered for .38 Special, increasing the versatility of this cartridge.
When did the US Air Force adopt the 38 Special cartridge?
In 1956, the U.S. Air Force adopted the Cartridge, Caliber .38, Ball M41, a military variant of the .38 Special cartridge designed to conform to the rules of land warfare.
What was the 38 Special in World War 2?
During World War II, some U.S. aircrew (primarily Navy and Marine Corps) were issued .38 Special S&W Victory revolvers as sidearms in the event of a forced landing.
When did the Smith and Wesson 357 Magnum come out?
So instead of one big comprehensive chart for every Smith & Wesson revolver ever made, I’m offering this smaller bite-sized chunk: every post-1957 .38 Special and .357 Magnum revolver from S&W that officially entered full-scale production. Why 1957?
What was the serial number of the M & p 38 Special?
Barrel lengths were 4-, 5-, 6-, and 6.5-inches with a rounded butt. Serial numbers for the Military & Police ranged from number 1 in the series to 20,975. Most of the early M&P revolvers chambered in .38 Special appear to have been sold to the civilian market.
What did the Victory Model 38 Special do?
Victory model 38 Special – 352,000 shipped to the Army and Navy. Some of these were shipped to a commission responsible for supplying the civilian industries. They will usually have no property marks. Uses included guarding factories, ports, and federal/local government agencies.
Where to look for model number on S & W?
This is where to look for the model number (not used until around 1957). Sometimes the serial number is here, especially in later models. .32-20 Hand Ejector 32-20 Win. K both of these used a shorter than standard cylinder.
Where is the serial number on a S & W 38?
That is the one consistent place S&W put the serial #. The other numbers can be, and usually are, simply assembly numbers that have no meaning after leaving the factory. Official serial number location on S&W revolvers is on bottom of grip although many later units have it in the yoke cutout also.
Where is the serial number on a Smith and Wesson revolver?
Columbia, MO 65201. Revolvers – The official serial number is located on the bottom of the butt of the frame. Some revolvers also have the serial number located on the inside of the frame, in the yoke area.
When was the Smith and Wesson Model 10 special made?
Manufactured from 1945 thru 1948. .38 Special …Click for more info SMITH AND WESSON MODEL 10-5 38 SPECIAL CALIBER IN BLUE FINISH MADE IN 1977. THIS REVOLVER MAY HAVE BEEN REFINISHED AT SOME TIME AS S&W LOGO ON FRAME IS A LITTLE LIGHT.
What’s the difference between A.38’s and W special?
One would think Smith & Wesson would have used the case dimensions of the 1877 version when it developed the .38 S&W Special. It didn’t. Industry specifications for the two cartridges show the only shared dimension is the rim diameter. The .38 S&W case body is 0.007 inch fatter than the .38 S&W Special. The bullet diameter is slightly larger.
What kind of gun is the Smith and Wesson Special?
The .38 Smith & Wesson Special, also commonly known as .38 S&W Special, .38 Special, .38 Spl, .38 Spc, (pronounced “thirty-eight special”), or 9x29mmRis a rimmed, centerfirecartridgedesigned by Smith & Wesson. It is most commonly used in revolvers, although some semi-automatic pistolsand carbinesalso use this round.
Where do you find the serial number on a s and W?
Examine the surface of the S&W gun to find the serial number. Depending on what year it was made, the serial number could appear in various places, such as below the barrel on a revolver or on the bottom of the grip.
How to find the year of manufacture on an S & W?
For example, pre-World War Two models have only numbers, while later models can include letters. These models can begin with the prefix S, N, C, D or K. Consulting the Standard Catalog is the only accurate way to find the exact year of manufacture.