What are the safety measures in laboratory?

Wearing the proper protective clothing is the best way to protect yourself while working in the laboratory. Remove personal protective equipment and wash your hands before leaving the laboratory. When directly handling hazardous materials, wear your safety glasses, long pants, lab coat, gloves and closed toe shoes.

What are 4 safety measures that must be taken when doing a lab?

Basic Safety Rules

Know locations of laboratory safety showers, eyewashstations, and fire extinguishers.
Know emergency exit routes.
Avoid skin and eye contact with all chemicals.
Minimize all chemical exposures.
No horseplay will be tolerated.
Assume that all chemicals of unknown toxicity are highly toxic.

What are the safety precautions in electronics?

Always make sure that all parts of electronic equipment are well-mounted to prevent accidents. Always check for signs of wear, defects and fraying on electronic equipment cables, cords and connectors. Use special safety rubber gloves and shoes.

What are the safety precautions in electrical laboratory during experiment?

Inspect wiring of equipment before each use. Replace all frayed or damaged electrical cords immediately. Only equipment with three prongs (ground) should be used in the laboratory. Limit the use of extension cords.

What are the top 10 lab safety rules?

Top 10 Lab Safety Rules

Rule #1 – WALK.
Rule #2 – PROPER LAB ATTIRE.
Rule #3 – HANDLING CHEMICALS.
Rule #4 – HANDLING EQUIPMENT.
Rule #5 – BROKEN GLASS.
Rule #6 – EYE WASH/SHOWER.
Rule #7 – FIRE SAFETY.
Rule #8 – EATING/DRINKING IN LAB.

What are the specific rules and practices in the electronic laboratory?

Maintain a work space clear of extraneous material such as books, papers, and clothes. Never change wiring with circuit plugged into power source. Never plug leads into power source unless they are connected to an established circuit. Avoid contacting circuits with wet hands or wet materials.

Why is safety important in electrical lab?

From chemicals to electrical equipment, laboratories reap a wide array of safety hazards, which is why it is so vital to understand the important of lab safety. Equipment can be damaged, fines can occur, and individuals on your team can be injured. …

What are the rules for electrical safety in a lab?

Electrical safety rules help prevent the misuse of electronic instruments, electric shocks and other injuries, and ensure that any damaged equipment, cords, or plugs are reported to the appropriate authorities so they can be repaired or replaced.

What do you need to know about Lab Safety?

When performing laboratory experiments, you should always wear a smock or lab coat. Before leaving the lab or eating, always wash your hands. After performing an experiment, you should always wash your hands with soap and water. When using lab equipment and chemicals, be sure to keep your hands away from your body, mouth, eyes, and face.

Why are electrical devices dangerous in the laboratory?

These and all electrical devices used in the lab setting present a potential danger of injury due to electric shock, fires due to poorly installed or maintained systems and fires due to sparks serving as an ignition source for flammable or combustible materials. Electrical Safety in the Laboratory | Environmental Health and Safety

What are some safety precautions to take when working with electronic equipment?

To avoid this, you should take a few safety precautions, including: • Always read safety procedures that come with every electronic equipment you’re about to test or work on. • Recheck all wires for bad connections • Always make sure that all parts of electronic equipment are well-mounted to prevent accidents.