Why will my airsoft gun not shoot?
Make sure your battery is charged. If your battery is dead and will not take a charge you will most likely need to replace it. Check the fuse. Many AEGs have a fuse, if the fuse goes out the gun will not function.
What kind of fuse do airsoft guns use?
In general, Airsoft factories use 15 amp fuses in order to protect the circuit of the motor. In case your motor fails when you fire the trigger, the first diagnostic step is checking your battery and fuse connection.
Why is my airsoft gun beeping?
The beep after each shot is okay. If it’s beeping without you firing then it’s not. It will beep continuously when it gets too low. In short, this.
Why is my AEG dry firing?
Like Andy Sutcliffe said, the major problem with dry firing any AEG is that the lack of resistance (no BB in the barrel) may cause the piston to slam into the end of the cylinder and maybe crack it. Simple tuning goes a LONG way. Start by working to minimize air leaks.
What is a airsoft Mosfet?
When specifically discussing airsoft uses, mosfets are used for diverting the electrical current away from the trigger contacts. When installed into the wiring of an airsoft gun, the mosfet redirects the current from the battery to go straight to the motor without going through the trigger contacts first.
Why is my airsoft gun double feeding?
Double (triple, quadruple, etc.) feeds on an AEG can be caused by many things including, but not limited to, issues with the hop-up bucking, bucking to air nozzle alignment, air nozzle length, hop-up unit, and hop-up unit to gearbox alignment. Most of the time, the problem comes down to the hop-up bucking itself.
Is it bad to dry fire an AEG?
Experts in airsoft guns say that dry firing an AEG is not bad, but it is not recommended. So, if you want to mitigate this stress on the cylinder head, don’t dry fire your airsoft gun too often. However, if you really need to do it such as to clear your airsoft gun after a game, it is ok to do it.
Is it okay to dry fire AEG?
Dry firing your AEG anything more than 2 – 3 shots on semi after you’re done playing with it is a bad idea; it will speed up the wear and tear on the internals, which isn’t something that most people will want to do. You should avoid dry firing as much as possible.