Why is my SATA drive not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable.

How do I fix SATA port not detected?

Quick Fix 1. Connect ATA/SATA Hard Drive with Another Cable Port

Reconnect the hard drive with the data cable port or connect ATA/SATA hard drive to another new data cable in PC;
Connect the hard drive with another desktop/laptop as a second HDD;

How do I enable SATA in BIOS?

To Set the System BIOS and Configure Your Disks for Intel SATA or RAID

Power on the system.
Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.
In the BIOS Utility dialog, select Advanced -> IDE Configuration.
In the IDE Configuration menu, select Configure SATA as and press Enter.

How do I get BIOS to recognize SSD?

Solution 2: Configure the SSD settings in BIOS

Restart your computer, and press the F2 key after the first screen.
Press the Enter key to enter Config.
Select Serial ATA and press Enter.
Then you’ll see SATA Controller Mode Option.
Save your changes and restart your computer to enter BIOS.

Why is my new hard drive not detected?

If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.

Why Is hard drive not detected?

How do I know if my SATA port is bad?

Bad Sata Port (or Cable) Symptoms

Occasional blue screen of death (BSOD) crashes.
Random long freezes – sometimes followed by an automatic shut down and restart.

How do I enable SATA ports?

During the starting of the notebook PC, repeatedly press the F10 key (or key designated by the notebook PC) until the notebook enters the Computer Setup screen. Use the arrow keys to select System Configuration. Use the arrow keys to select SATA Native Mode and set the mode to Enable.

How do I enable AHCI in BIOS?

1. Enable AHCI mode in BIOS

Shut down your system.
Power the system On, and tap the F2 key to boot to BIOS.
Go to System or Hardware configuration (this will differ based on BIOS).
Look for AHCIor SATA mode.
Enable AHCI or under SATA mode, set it to AHCI.
Save and Exit BIOS.
AHCI will be enabled.

What causes a hard drive not to be detected?

How do I fix Windows not recognizing my external hard drive?

External Drive Not Showing Up or Detected? 6 Fixes to Try

Make Sure Your External Drive Turns On. This is a preliminary step, but still one worth checking.
Check the Drive in Disk Management.
Try Another USB Port and Computer.
Troubleshoot Device Driver Issues.
Create a New Drive Volume.
Format the External Drive.

Why is my SATA hard disk not recognized?

I just wanted to know if I can fix it somehow or I should throw it away. the problem is that the hard disk is not recognized. SATA disks usually show up as /dev/sdX (sda, or sdb, or something like that). do you see this disk at all?

Why does the Ubuntu installer not detect the hard drive?

As workaround I went in the BIOS and set the SATA Mode to “IDE” and the SATA3 Mode to “AHCI”. After doing this the installer did detect the hard drive and installed Ubuntu alongside the other operating system.

Why does Linux not see my SSD drive?

I’ve tried multiple combinations of things – completely wiped the drive, disabled UEFI, Secure Boot and enabled Legacy mode, etc – and nothing works. The currently locked SATA mode basically prevents Linux from even seeing the SSD. I’ve tried the latest versions of Ubuntu and Gentoo – both with the same result.

Why is my hard drive not detected in Linux Mint?

No when I boot on the Linux Mint 18.3 installer, the hard drive is not detected (the installer crashes for this reason and I can check that the hard drive is not seen by Gparted for instance).