How long should crossbow arrows be?

18″ to 22″
Crossbow arrows are shorter than regular arrows and are usually 18″ to 22″ long. Do not use a regular arrow with a crossbow.

How do you determine crossbow bolt length?

The proper bolt length should be the same as the groove of the crossbow or up to 2 inches longer. In general, the longer arrows the more stability you’ll have. The weight of the bolt can also have a big impact on your shooting, depending on the crossbow.

Are all crossbow arrows the same length?

Most crossbow arrows are 16″ to 22″ in length, with the average being 20 inches. All crossbows come with a recommendation from the manufacturer regarding the length of the arrows you should use; when purchasing new arrows, you should make sure that they are the same length as recommended.

How heavy should my crossbow bolts be?

weigh-in between 350 to 399 grains, standard weight crossbow bolts range from 400 to 459 grains, and heavyweight crossbow bolts weigh-in at a hefty 460 grains and above. These bolt weights include the weight of a standard 100-grain field point in addition to the weight of the finished bolt itself.

Can a crossbow shoot farther than a conventional bow?

As the bow is shot, the string on a conventional compound bow pushes the arrow more than twice the distance as when a crossbow is shot. In range and power, a crossbow is equivalent to a longbow or compound bow that is about half the crossbow’s draw weight. …

Does the length of a crossbow bolt matter?

Bolt Length Bolts range in length from 16” to 22”. It is possible to get away with a longer bolt than recommended, but anything shorter than what is recommended could cause the broadhead or field point to get caught on the crossbow rail when fired.

Can you use any bolt for a crossbow?

The terms ‘bolts’ and ‘arrows’ often get confused with one another, but they are not interchangeable. A bolt is designed to be used with a crossbow while an arrow is designed to be used with a regular bow. Most crossbow bolts measure anywhere from eighteen to twenty-two inches in length.

What length of arrows do I need?

The standard way to measure arrow length is from the back of the point to the throat of the nock. Your draw length and arrow spine will influence your arrow length. If you’re a 28-inch draw length and want an arrow that ends at the front of the riser, your arrow length would be around 27 inches.

How many yards does a crossbow arrow drop?

You’ll probably be sighting your crossbow at 20 yards; this will roughly mean that you need to off-set all of our readings from the charts above by 10 yards. So if you’are sighted in at 20 yards, your arrow drop at 30 yards will be very close to the 20 yard readings in our chart. And at 40 yards, it will be close to our 30 yard readings.

How big of an arrow do I need for a 60 lb bow?

Also, we strongly recommend that you use an arrow with at least 5 grains of weight per pound or draw weight (if you are shooting a 60 lb. bow, you should use and arrow of not less than 300 grains).

How much weight does a crossbow have to be to kill a deer?

While those regulations vary considerably from state to state, the overall range runs from 75 to 125 pounds of draw weight. With little exception, any crossbow in that range should be adequate to kill a whitetail deer at moderate ranges.

How big of a range do you need for a crossbow?

The crossbows were sighted in at 10 yards (due to indoor shooting range size limitations and because the goal was to get as many readings past zero as possible) and then multiple arrows were shot at each different speed setting.