What was the serial number of the 1860 Colt revolver?

What was the serial number of the 1860 Colt revolver?

There are very few variations on the 1860 Army Revolver, but there was limited production of a 7.5-inch barrel model below serial number 3500, and a lightened model with cylinder flutes below serial number 8000.

What was the retention latch on the Colt Paterson revolver?

A similar retention latch system can be seen in Colt’s 1850 patent: As with other Colt percussion revolvers with loading levers, the rammer acts on the 6 o’clock cylinder. To load, the revolver was brought to half cock, powder was poured into the chamber, followed by round ball projectile.

What was the muzzle velocity of a Colt revolver?

The percussion cap, when struck by the hammer, ignited the powder charge. When fired, balls had a muzzle velocity of about 900 feet per second (274 meters/second), although this depended on how much powder one loaded it with. The unfluted cylinder was “rebated”, meaning that the rear of the cylinder was turned to a smaller diameter than the front.

What kind of Revolver was the Colt Army?

The Colt “Army” revolver is to be distinguished from the Colt “Navy” revolver of which there were two models, the octagonal barrel Model 1851 Navy, and the round-barreled Model 1861 Navy, both Navy models being in the smaller .36-caliber. 15lb. 15lb.

What’s the serial number on a 1909 Colt?

A thousand 1909 .45 caliber Long Colt revolvers were also acquired by the United States Navy. They are easily recognizable by the anchor mark above the USN (United States Navy) roll-stamped on the frame, on the butt. On the latter we also find the navy serial number, in our case 484.

Where is the serial number on a colt?

The grip is of the “square butt” variety with walnut grips without checkering and the usual oval-shaped lanyard ring. The Colt serial number is on the rear of the cylinder latch and on the frame, near the cylinder crane. The number was also marked in pencil on the inside of the grips.

What was the price of a Colt Army revolver?

Colt had been criticized for this high price, and by 1865 the revolver was reduced to $14.50. The Colt “Army” revolver is to be distinguished from the Colt “Navy” revolver of which there were two models, the octagonal barrel Model 1851 Navy, and the round-barreled Model 1861 Navy, both Navy models being in the smaller .36-caliber.

Is there a demand for the Colt 1860?

The demand of new COLT 1860 ARMY pistol’s has risen 4 units over the past 12 months. The demand of used COLT 1860 ARMY pistol’s has fallen 2 units over the past 12 months. MANF.

Colt had been criticized by this high price, and by 1865 the revolver was reduced to $14.50. The Colt “Army” revolver is to be distinguished from the Colt “Navy” revolver of which there were two models, the octagonal barrel Model 1851 Navy, and the round-barreled Model 1861 Navy, both Navy models being in the smaller .36-caliber. 15lb. 15lb.

How can I find the serial number of a colt?

Enter the serial number, without spaces or dashes, to search the database. If multiple models appear for your serial number simply match the date with the appropriate model, as certain vintage firearms can share serial numbers between different models.

How big is A.44 caliber Colt revolver?

Antique Colt Model 1860 Army Revolver, .44 Caliber Weight 15lb. Height 13.5″ Width 10″ Depth 2″ Origin American

When did the US Navy start ordering Colt revolvers?

The United States Navy ordered 900 fluted cylinder revolvers in May 1861 later issued to ships enforcing the Atlantic and Gulf blockade. United States Army orders also began in May, and 127,157 had been delivered before a 5 October 1864 fire put Colt’s factory out of operation for the duration of hostilities.

What kind of gun was the 1860 Army?

The frame is relieved to allow the use of a rebated cylinder that enables the Army to be chambered in .44 caliber. The barrel on the 1860 Army has a forcing cone that is visibly shorter than that of the 1851 Navy, allowing the Army revolver to have a longer cylinder.