Mell How do I make my voice sound quality in Audacity?
In Audacity, you can do this by:
- Highlighting a section of recording where no deliberate sounds were made.
- Then select Effect > Noise Removal in the menu options.
- Click on Get Noise Profile.
- Now highlight the entire recording from start to end.
- Select Effect > Noise Removal in the menu options again.
- Click OK.
How heavy is the Samson G Track Pro?
3.52 lb / 1.6 kg
Samson G-Track Pro Specs
| Mounting | Tabletop (with Included Hardware) 5/8″-27 Female, Shockmount (with Optional Hardware) |
|---|---|
| Construction Material | Zinc |
| Dimensions | ø: 4.5 x L: 10.5″ / ø: 114.3 x L: 266.7 mm |
| Weight | 3.52 lb / 1.6 kg |
What cable does Samson G Track Pro use?
Usb
USB Cable for Samson G-Track
| Connector Type | Usb |
|---|---|
| Cable Type | USB |
| Brand | Exact C |
How to use the Samson G Track Pro?
From the Start Menu, open the Control Panel and select Sound. Click the Recording tab and select the Samson G-Track Pro as the audio input device.
How to set the G-Track Pro as an output device?
Set the G-Track Pro as the output device by clicking the Playback tab and selecting the Samson G-Track Pro. Set the Input sample rate by clicking the Properties button and selecting the Advanced tab. Note: The Input and Output sample rates must be set to the same setting.
How to set sample rate in G-Track Pro?
Set the Input sample rate by clicking the Properties button and selecting the Advanced tab. Note: The Input and Output sample rates must be set to the same setting. To avoid any sample rate conversion issues, make sure that the sample rate in your software is set to the same settings.
How to record two people on a G-Track Pro?
Set the G-Track Pro’s pattern switch. If you are recording a single person, set the switch to the Cardioid position and be sure to face the front side, with the Samson logo. If recording two people, set the microphone to the Figure-8 position and if recording multiple subjects, set the switch to the Omni position.