When did the Smith and Wesson 32 S and W come out?

Page Contents

When did the Smith and Wesson 32 S and W come out?

This is a lovely safety hammerless (First Model), .32 Smith and Wesson revolver, in .32 S&W, Mfg date between 1888 and 1902 this has a BBL of 3 1/2″ long and weighs in at 18oz. Have to see it …Click for more info

How big is the barrel of a Smith and Wesson?

Smith & Wesson Model US Army 1917, 6 shot , 5.5 inch barrel, double action – .45 ACP BuyItNow! Smith & Wesson Smith &Wesson .38 cal. Police and Military – .38 Caliber BuyItNow! Smith & Wesson 28-2 Highway Patrolman 357 magnum 4 inch barrel – .357 Magnum BuyItNow!

When did the.32 caliber revolver come out?

Small frame S&W revolver manufactured from 1972 to 1976. .32 S&W Long …Click for more info Caliber 32 CF. 3 inch solid rib barrel with visible markings and some wear. Hard rubber checkered grips with the H & A motif on each side. Leroy Merz Antique Firearms specializes in antique and …Click for more info $ 265.

How much does a 32 W C F revolver cost?

$ 265. “This 32 W.C.F. (32-20) Colt Bisley Model revolver is circa 1912, the year that the Bisley Model was discontinued. The 4.75″” barrel has a fine bore with frosting in the grooves. The ba …Click for more info

What kind of gun is A.32 Cal?

This Colt Single Action Revolver model is a 6 shot handgun in .32 WCF Cal. It has a 4.75 inch barrel. A blade front sight and an integral notch rear sight. The grip is a worn checkered dark brown Bake …Click for more info

What kind of target is a Smith and Wesson?

THIS IS A SMITH & WESSON “.22 HEAVY FRAME TARGET” ALSO KNOW AS THE “.22/32 TARGET OR THE “BEKEART MODEL”, .22 LR. THE REVOLVER IS IN VERY GOOD CONDTION.

What kind of Smith and Wesson revolvers are there?

Our inventory includes everything from the Civil War era Smith and Wesson .32 Army #2 revolver to 1st and 2nd model Americans to the D.A. Frontier .44-40. If you don’t see the antique Smith and Wesson revolvers you’re looking for, bookmark our new arrivals page and check back frequently.

How much does a Smith and Wesson pistol cost?

How Much Do Smith & Wesson Pistols Cost? Smith & Wesson handguns vary in price from just a few hundred dollars to several thousand dollars, with the price tag depending on numerous factors. The Model 19 lists for about $700 to $1,000, while the Model 29 sells for slightly more, around $1,200.

Are there any antique Smith and Wesson revolvers?

Antique Smith and Wesson revolvers represent some of the most highly collectable pieces from one of America’s most historic gun manufacturers. Our inventory includes everything from the Civil War era Smith and Wesson .32 Army #2 revolver to 1st and 2nd model Americans to the D.A. Frontier .44-40.

Read more:   Which DVD format is most compatible?

What kind of barrel does a Smith and Wesson have?

Barrel is 4 5/8″ and was almost certainly altered by the famous gunmaker Gastinne Renette. Gun has about 90% plus original blue and excellent rosewood grips. Smith & Wesson 2nd Model American .44 Caliber Revolver.

.32 S&W. The .32 S&W cartridge (also known as the .32 S&W Short) was introduced in 1878 for Smith & Wesson pocket revolvers. It was originally designed as a black powder cartridge.

Is the.32 Merwin and Hulbert the same as the.38 S & W?

The .32 Merwin & Hulbert cartridge is the same as the .32 S&W. Merwin & Hulbert rebranded the .32 S&W and .38 S&W with their own name, but dimensionally they were the same. Guns chambered in .32 S&W have been used in at least three notable assassinations :

Where did the.32 s and W cartridge come from?

The .32 S&W Long cartridge is derived from the .32 S&W, by increasing the overall brass case length, to hold more powder.

Can a 32 S and W be fired in an arms chamber?

Since the .32 S&W headspaces on the rim and shares the rim dimensions and case and bullet diameters of the longer .32 S&W Long, the .32 H&R Magnum cartridges, and the .327 Federal Magnum, .32 S&W cartridges may be fired in arms chambered for these longer cartridges.

What kind of cartridge is.32’s and W?

This performance made guns chambered in .32 S&W, sometimes referred to as .32 Short, very popular as a gentleman’s “vest gun”. The .32 S&W Long cartridge is derived from the .32 S&W, by increasing the overall brass case length, to hold more powder.

What kind of Revolver is a Smith and Wesson?

Smith & Wesson . 32 Safety Hammerless Revolver: Smith & Wesson . 32 Safety Hammerless Revolver: Offered for sale is a Smith & Wesson . 32 Safety Hammerless Revolver. The revolver features a 3″ barrel,

What was the first double action Smith and Wesson?

The Smith and Wesson 32 Safety Hammerless was one of the very first double action revolvers to feature a grip safety. In this GunTec Presentation Larry Potterfield, CEO and Founder of MidwayUSA, examines the features and specifications of this neat little revolver.

Is there a 32 caliber revolver for sale?

FOR SALE IS A COLT 1905 DOUBLE ACTION REVOLVER IN 32-20 W.C.F. CALIBER. THE REVOLVER HAS A 5 INCH BARRREL , DOUBLE ACTION MECHANISM, WITH BLACK PLASTIC GRIPS AND FIXED SIGHTS..

What kind of Revolver is a 32 Hand Ejector?

Pre-War Colt Single Action Army Revolver Manufacturer: Colt Model: Single Action Type: Revolver Gauge: 32 WCF Barrel: 4 1/2 inch round. Finish: blue/casehardened Grip: hard rubber Class: Cur …Click for more info Sold… S&W .32 Hand Ejector First Model, serial # 6554. This revolver has a 3 1/4 barrel, is nickel plated with the original grips.

What was the first Smith and Wesson Model?

This model represented a number of firsts for Smith & Wesson Company. It was first of the top-break automatic ejection revolvers. Also first Smith & Wesson in a large caliber (chambered for .44 S&W American cartridge as well as .44 Henry rimfire on rare occasions). Also known as 1st Model American.

What was the serial number of the Smith and Wesson hammerless?

Approximately 41,500 manufactured between 1907 and 1940. Serial number range 220001 to 261493. NOTE: Add 50 percent for 2″ barrel version. This model represented a number of firsts for Smith & Wesson Company. It was first of the top-break automatic ejection revolvers.

What kind of Revolver does Smith and Wesson make?

FASCINATING, TEXAS SHIPPED NEW MODEL No. 3 .44 RUSSIAN CALIBER REVOLVER WITH SCARCE 5″ BARREL, S&W FACTORY LETTER. This nickel plated revolver with serial number 35XXX and stamped on the left …Click for more info $3650. O.SMITH’s PATENT SPUR TRIGGER REVOLVER, .41 Rim-Fire, 2-1/2” barrel, smooth Walnut grips.

How big is the barrel on a Smith and Wesson?

This Smith & Wesson Model 1 2nd Issue is a 7 shot single action revolver in .22 Short B.P. Cal. It has a 3 1/8 inch octagon barrel. A fixed blade front sight and notch rear sight.

When is the latest Smith and Wesson patent date?

On the top of the barrel, it has the S&W as the manufacturer, Springfield, Mass, USA, and gives patent dates. The latest date is DEC 29, 14. On the side of the revolver that has the chamber release, it has SMITH & WESSON on the side of the barrel.

What was the caliber of the Smith and Wesson Safety Hammerless?

It was chambered in .32 S&W and .38 S&W calibers; these revolvers were discontinued prior to World War II, being eclipsed by the stronger hand ejector models. Smith & Wesson New Departure .32 S&W fired one-handed from 15 yards.

What was the caliber of the Smith and Wesson Model 2?

Based on the Smith & Wesson Model 2 double-action design, the revolver incorporated an internal hammer and an external grip safety on its back-strap. It was chambered in .32 S&W and .38 S&W calibers; these revolvers were cancelled prior to World War II, being eclipsed by the stronger hand ejector models.

How to identify the date of manufacture on Smith and Wesson pistols?

How to Identify the Date of Manufacture on Smith & Wesson Pistols. The Smith & Wesson company was formed in 1852, in Norwich, Connecticut. The company’s first offering was a lever-action repeating pistol. Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns.

Where to find serial number on Smith and Wesson CTG 32?

SERIAL # LOCATIONS: To confirm all parts are original, one can check for the 6 matching serial # locations for fixed sight pre war Hand Ejectors and all post war Hand Ejectors thru ~1956 and a few as much as 3 years later.

How to date a Smith and Wesson revolver?

For the exact date on your gun request the letter from S&W Historian Roy Jinks. Pre-War N frame. *Note that a number of N frames with serials in the S138000-S140000 range (and the range may be wider either way) are seen that were shipped much later than the serial would suggest should be the case.

Read more:   How do I delete apps from my iPad but not my Iphone?

What does CTG stand for on a Smith and Wesson?

CTG stands for cartridge and indicates what cartridge the gun is chambered for. It’s not a model name or number. I was able to get some pics. Only found 1 serial number on the gun. Didn’t want to remover the handles You have a Model 1903, 1st Change from 1904.

How to tell the age of a Smith and Wesson?

In Neal and Jinks, S&W:1957-1945, there is reference to a factory change order dated May of 1922 that instructs manufacturing to put the MADE IN U.S.A. stamp on every revolver. Click to expand… The catalog date is a little conservative and the would be a “for sure” date by when all would be marked.

What’s the serial number on a Smith and Wesson?

With that serial number, the tables in the Standard Catalog of Smith & Wesson by Mr. Jim Supica and Mr. Richard Nahas suggest an early post WW1 manufacture date. your gun was built before the introduction of heat treated cylinders, a process that began around 1920-21 or so, at about serial number 20,000.

When was the US Revolver co.32 made?

Welcome to TFF. Whether a .32 or .38, it was made in 1911, and all of Iver Johnson’s U. S. Revolver Co. guns were made for modern smokeless powder ammo. Correct .32 ammo is .32 S&W.

How old is a Smith and Wesson revolver?

One of the most common postings I’ve noticed on gun forums begins with a member that has a Smith & Wesson revolver; they want to know everything about what it is, how old it is, and how much it’s worth.

What kind of gun is a Smith and Wesson?

Smith & Wesson Factory Engraved .32 caliber revolver. .32 caliber handgun factory engraved. This gun has a good bore with strong rifling and 70% factory nickel.

What’s the price of a Smith and Wesson 642?

A SMITH AND WESSON 642 pistol is currently worth an average price of $494.51 new and $407.10 used . The 12 month average price is $499.99 new and $428.24 used. The new value of a SMITH AND WESSON 642 pistol has fallen ($4.78) dollars over the past 12 months to a price of $494.51 .

Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup. For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1 1952 = 7369 – 21342 1953 = 28916 1955 = 55050 – 75000 1957 = 117770 – 125000 1962 = starts at 295000 1969 = ends at 786544 J serial Prefix serial numbers. For models 36, 37, 38, 49, 50.

What was the first gun made by Smith and Wesson?

The company’s first offering was a lever-action repeating pistol. Moving forward from those beginnings, Smith & Wesson shaped innovations in the manufacturing of modern handguns. As of March 2011, Smith & Wesson offers approximately 110 different pistols of varied designs and features. Examine the barrel of the Smith & Wesson pistol.

What kind of Revolver is the.32 S & W Long?

The IOF .32 Revolver manufactured by the Ordnance Factories Organization in India for civilian licence holders is chambered for this cartridge. Modern High velocity loadings of the .32 S&W Long/Colt New Police.

What’s the difference between.32 and.32 S & W Long?

The .32 S&W Long headspaces on the rim and shares the rim dimensions and case and bullet diameters of the shorter .32 S&W cartridge and the longer .32 H&R Magnum and .327 Federal Magnum cartridges.

When was the 4th model Smith and Wesson made?

The 4th model Smith & Wesson 32 Double Action was made from 1883 to 1909. By the serial number, this one probably dates from before 1900. Chambered for the 32 S&W cartridge.

What kind of Revolver is the Smith and Wesson Model 30?

The Model 30 Smiths are all round-butt style revolvers. Smith did make a square butt version of this revolver under the Model 31 name. Other than the shape of the grip frame these revolvers are identical. .32 S&W Long on the left, 9mm on the right.

What kind of revolver can shoot.32 S & W?

Not to say that we don’t have revolvers that will shoot the S&W .32 Long cartridge. In fact, all revolvers that can shoot the newer .32 H&R Magnum or .327 Federal Magnum cartridge can also shoot the S&W .32 Long cartridge.

Can you hand load A.32’S & W Long?

Handloading the .32 Long for good performance is easy for an experienced loader. The small case capacity makes it possible to get 2000 good loads from a pound of powder and cast bullets work very well. This entry was posted in Handguns and tagged .32 S&W Long ammunition, Smith & Wesson .32 Long, Smith & Wesson Model 30-1. Bookmark the permalink .

Is there a Smith and Wesson 32 Hand Ejector?

Smith & Wesson Model 34-1 22/32 Kit Gun 22LR 4″ LNIB – .22 LR BuyItNow! Smith & Wesson 325PD AIR LITE WITH FACTORY BOX 1.5″ BARREL – .45 ACP BuyItNow! Smith & Wesson 32 Long, 32 Hand Ejector 2ND Model of 1903 , serial # 161697, 4 1/4″ BBL, 6 shot fluted cylinder – .32 S&W BuyItNow!

When was the Smith and Wesson Model 1917 made?

Smith & Wesson produced approximately 169,595 U.S. Army Model 1917 Revolvers between 1917 and 1919. All revolvers were polished blue with 5.5-inch barrels and chambered to shoot the .45 A.C.P. rou …Click for more info This pistol was made around 1961. The pistol’s serial number is K 493442.

How big is the barrel on a Smith and Wesson Model 17?

NEW THIS WEEK! Smith and Wesson Model 17-5 revolver, .22 Long Rifle CTG, 6 inch barrel, overall length of 11.25 inches, capacity of 6 rounds. K-frame, double action. 1980’s manufacture, fixed front sig …Click for more info

Read more:   How do you describe programming?


THIS IS A SMITH & WESSON MODEL 1 1/2 FIRST ISSUE, .32 RIM FIRE SHORT. THE REVOLVER IS IN VERY GOOD CONDITION. ALL ORIGINAL, NUMBER MATCHING, VERY GOOD BORE AND GRIPS (CUSTOM MADE),… (read more) THIS IS A SMITH & WESSON “LEMON SQUEEZER” 1ST MODEL REVOLVER, .32 S&W. THE REVOLVER IS IN VERY GOOD CONDITION.

Why do people still use the Smith and Wesson 38?

The reasons for using them in that role are often based on some kind of trade off between size or cost but in the case of the .38 Smith and Wesson, it may simply be that the gun in question is available as a relic from some former life and other better options are not (or would require money that’s not) available.

Which is larger.38 special or.38’s and W?

Technically, the .38 S&W bore diameter is slightly larger than that of .38 Special and .357 Magnum but in practice, components intended for the latter will work well enough.

Smith & Wesson New Departure .32 S&W fired one-handed from 15 yards. The Smith & Wesson .38 Safety Hammerless models were produced from 1887 (1888 for the 32) to just before World War II. They were chambered in either .32 S&W or .38 S&W with a five-shot cylinder.

When did the Smith and Wesson 38 come out?

The Smith & Wesson .38 Safety Hammerless models were produced from 1887 (1888 for the 32) to just before World War II. They were chambered in either .32 S&W or .38 S&W with a five-shot cylinder. They were most often produced with a 2-inch, 3-inch, or 3.5-inch barrels; but some 6″ barrelled versions are known to exist.

When did Smith and Wesson make the bekeart?

These guns became known as Bekeart models and are highly collectible. Only 292 of the first 1,000 guns were delivered to Bekeart, and some went to other dealers. It was 1915 before Smith & Wesson put the model into regular production. Bekeart models were not marked, so identifying them can be confusing.

Is the Smith and Wesson 32 CTG in good condition?

You need to remove them and verify the SN on the bottom of the grip frame. The grips that came with it were hard rubber but those grips are much easier to hold for target shooting. The gun itself is in fair condition and is not valued very highly. The grips, however, are quite collectible. You have a Model 1903, 1st Change from 1904.

Where is the yoke on a Smith and Wesson 32?

Yoke – on rear face only visible thru a chamber with a flashlight (except the .32 Model 1896 and no doubt a few others) 4. Extractor star – backside 5. Cylinder – rear face 6.

PHONE 260 367 2633 CELL 260 243 0700 …Click for more info SMITH & WESSON 1st Model “NEW DEPARTURE” .32 Safety Hammerless REVOLVER C&R 6-Shot ‘LEMMON SQUEEZER” Conceal Carry Revolver! SMITH & WESSON 1st Model “NEW DEPARTURE” .32 Safety Hammerless REVOLVER C&R 6-Shot ‘LEMMON SQUEEZER” Conceal Carry Revolver!

What is the number on a 32 long CTG revolver?

On the other side it has 32 LONG CTG on the barrel and MADE IN USA at the trigger. Under the handle it has the number 518528. There is also a number on the side end of the chamber from which the shells are inserted. That number is 518528. Inside of the chamber at the hindge is 2 numbers which are the same. The number is 21071.

When did the Smith and Wesson Model 16 come out?

Smith & Wesson’s Models 16 and 17 have their origins with the company’s Pre-World War 2 Hand Ejector series in the 1930s. These two revolver models debuted as companion pieces known as the Models K-32 and K-22 after World War 2. The K-32 Masterpiece (Model 16) debuted in 1935 and was chambered in .32 S&W Long caliber.

How big is the barrel on the Smith and Wesson 686?

The 686 has a four-inch barrel, an overall length of 9.6 inches, and weighs two and a half pounds. It also adjustable sights, a satin stainless steel finish, double action firing system and a six or seven round cylinder.

Which is the smallest Smith and Wesson revolver?

In Smith & Wesson’s lettering system the smallest revolvers use the so-called “J frame,” and one of the smallest revolvers of all is the Model 442 Pro Series. Designed as a concealed carry revolver, the 442 is chambered in.38 Special and can handle more powerful, higher pressure +P rounds.

How many Smith and Wesson magnums are there?

Only a little more than five thousand Registered Magnums were made and are worth thousands of dollars. One thing to consider with Smith & Wesson revolvers is that age does not necessarily equal value.

What’s the price of a Smith and Wesson?

$975. This revolver is a Smith & Wesson Model 1905 chambered in .38 S&W Special. It has a pinned barrel, checkered wooden grips, and blade front sight. This firearm is in good condition overall, wit …Click for more info

How big is the barrel on a Smith and Wesson Model 2?

Two Old Model Army Revolver AKA “No 2 Old Army”; .32 R.F. Caliber with 6” Barrel; Serial No. 16734; Early Civil War Mfg.; Cased and Engraved by L.D. Nims …Click for more info Smith and Wesson .32 Safety Hammerless (Second Model) in .32 S&W has a 3 1/2″ BBL and weighs only 16oz.

“Smith & Wesson 2nd Model American revolver with excellent bore, 90-93% nickel, very nice grips and excellent action. Overall this is a very fine American. Click for more info “Smith & Wesson No.2 Army Revolver. .32 Rimfire with a 6” barrel. Early model made in 1860. Approximately 20% of the original blue. Grips are excellent.