Mell Where is the serial number on a Smith and Wesson revolver?
Revolvers – The official serial number is located on the bottom of the butt of the frame. Some revolvers also have the serial number located on the inside of the frame, in the yoke area. Pistols – The serial number is located on the side of the frame.
When did the Smith and Wesson Model 25 come out?
S&W model 25-2 “.45 cal. MODEL 1955” revolver, .45 acp with a 6 ½” barrel. This is a very nice, high condition model 25 that was made in 1978. Over 98% …Click for more info SMITH & WESSON PRE 25 MODEL OF 1955 45 ACP REVOLVER 3 TTT 1956 YEAR MODEL 5 SCREW. Excellent condition “S” Prefix.
What’s the model number of a Smith and Wesson?
A number of production and engineering changes have been made throughout the years, some of which are noted by a dash number suffixed to the Model number (15-1, -2, -3). Over the years the Model 15 has been produced with several barrel lengths, with 4″ (standard) and 2″ (1964–1988) being the most common.
What kind of cartridge is the Smith and Wesson 15?
It is chambered for the .38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. Originally known as the “K-38 Combat Masterpiece”, it was renamed the Model 15 in 1957 when all Smith & Wesson revolvers were given numerical model numbers.
How big is the barrel on a 1955 Smith and Wesson?
Smith & Wesson 1955 Target with more rare early 6 1/2 inch barrel. S serial number 45 acp. Original box, Instruction book and Original Grips. I believe this revolver is unfired. Stallion Firearms …Click for more info S&W model 25-2 “.45 cal. MODEL 1955” revolver, .45 acp with a 6 ½” barrel.
Serial Number – Give us the serial number. You can X out the last digit or two but this is critical in dating the gun. 3. Model Number – On revolvers made post 1957, the model number is located on the inner frame, under the forcing cone of the barrel when the cylinder is open.
How old is a Smith and Wesson revolver?
One of the most common postings I’ve noticed on gun forums begins with a member that has a Smith & Wesson revolver; they want to know everything about what it is, how old it is, and how much it’s worth.
When did the Smith and Wesson Magnum come out?
In 1935 Smith & Wesson introduced the .357 Registered Magnum revolver and with it with recessed cylinders. This was done to protect the rim of the cartridge and was a feature on all Magnum chambered revolvers as well as .22 Long Rifle cylinders. In 1982 this was another feature eliminated by the factory except on the .22 Long Rifle revolvers.
Where are the Smith and Wesson guns made?
Location: Springfield, Massachusetts Since 1857 Smith & Wesson has staked its headquarters in Springfield, Massachusetts with manufacturing operations in Holton, Maine and other operations in Columbia, Missouri. Partnership with Horace Smith & Daniel B. Wesson was from 1856–1874. Family owned by the Wesson Family from 1874–1965.
When did Smith and Wesson change the name to model 27?
Smith & Wesson made a few changes to the .357 Magnum in 1950, including the new short-throw hammer design. In 1957, the company went to a numbering system for each handgun, and the .357 Magnum became the Model 27. The name had changed, but it was still a beautiful example of the gunmaker’s art.
When was the first S & W revolver made?
Pre-War N frame. *Note that a number of N frames with serials in the S138000-S140000 range (and the range may be wider either way) are seen that were shipped much later than the serial would suggest should be the case. In one known example a gun with serial S136431 was not shipped until June of 1958.
What kind of Revolver does Smith and Wesson make?
(This first appeared several months ago.) Smith & Wesson categorizes its revolvers using a system of letters, with the so-called “L” frames set in the middle between small and large caliber guns. One of the most popular “L frames” is the Smith & Wesson 686 .357 Magnum.
Who are the owners of Smith and Wesson?
Family owned by the Wesson Family from 1874–1965. Smith & Wesson became a subsidiary of Bangor-Punta from 1965–1983. Between 1983–1987, Smith & Wesson was owned by the Lear Siegler Co. On May 22, 1987, it was sold to R.L.Tomkins, a British holding company.
Columbia, MO 65201. Revolvers – The official serial number is located on the bottom of the butt of the frame. Some revolvers also have the serial number located on the inside of the frame, in the yoke area.
How big is the barrel on a Smith and Wesson 44 Magnum?
Smith & Wesson .44 Magnum Model 629 with 8 3⁄8 inches (21 cm) barrel: a stainless steel version of the Model 29. Both of these weights are for the traditional S&W style without a barrel underlug.
When did Smith and Wesson make the Model 29 Magnum?
S&W’s production of a large N-frame revolver in .44 Magnum began in 1955; the Model 29 designation was applied in 1957.
Where do you find the serial number on a pistol?
Locate the serial number on the left side of the pistol’s frame. The standard location for the serial number is above the trigger guard. Some serial numbers are located underneath the frame in front of the trigger guard. Others are on the rear of the frame, above the gun’s grip.
When did Smith and Wesson stop using 4 screws?
After 1955 the top side plate screw was eliminated, and from that time until 1961 the revolvers were known as 4-screw guns. After 1961 that trigger guard screw was done away with and from here after the revolvers were known as 3-screw guns.
Can a serial number on a s and W be off?
There is some dispute regarding the dates on some serial numbers and your gun may actually be a year off from what is listed. The precise shipping date as “lettered” can be several years off depending on model. For the exact date on your gun request the letter from S&W Historian Roy Jinks. Pre-War N frame.
Where do you find the serial number on a s and W?
Examine the surface of the S&W gun to find the serial number. Depending on what year it was made, the serial number could appear in various places, such as below the barrel on a revolver or on the bottom of the grip.
Where can I get a Smith and Wesson shotgun manual?
For Model 1020, 1012 or Elite Shotguns, please contact our Customer Service Department for parts or service at 800-331-0852. How can I obtain a manual for my S&W handgun or an S&W catalog?
What was the serial number for the.357 Magnum?
The serial number range for the pre-war .357 Magnum revolvers started at 45756 and ended with 62489 in 1941 when the U.S. entered World War II. This range of numbers also includes those for other N-frame models. After the war, production resumed in 1946 with an “S” prefix added to the serial number at S71801.
When did the Smith and Wesson 357 Magnum come out?
So instead of one big comprehensive chart for every Smith & Wesson revolver ever made, I’m offering this smaller bite-sized chunk: every post-1957 .38 Special and .357 Magnum revolver from S&W that officially entered full-scale production. Why 1957?
How to locate and verify the serial numbers on your S & W?
How to locate and verify the serial numbers on your S&W revolvers 1 Gun butt* – or forestrap* on I frames/single shots with grips that cover the butt 2 Barrel – bottom of barrel or in extractor shroud 3 Yoke – on rear face only visible thru a chamber with a flashlight** 4 Extractor star – backside facing cyl 5 Cylinder – rear face
When was the first Smith and Wesson made?
Patent dates are, March 7, 1894, May 21, 1895, August 4,1895, Dec. 22, 1895, October, 1901, and Feb. 06, 1906. Serial # 15563.
Where can I buy a Smith and Wesson pistol?
Browse the Guns.com inventory for the best deals on Smith & Wesson handguns for sale. We offer new and used revolvers and semi-auto pistols of the most popular varieties, as well as those models that are a bit more difficult to find.
What kind of magazines do Smith and Wesson pistols have?
We offer the most popular brands, including genuine Smith & Wesson magazines, made with different materials and finishes, ranging in capacities from 8 to 17 rounds. Use our simple filters to quickly and easily find magazines that are compatible with your pistol. Shop Guns.com for ammunition for your Smith & Wesson pistol or revolver.
How is the barrel attached to a Smith and Wesson revolver?
Well, prior to 1982, Smith & Wesson revolvers had the barrel attached to the frame by a pin through the rear of the barrel. This was seen as a mark of quality by the factory and is a bonus to collectors, even though it doesn’t affect the value.
Where can I get a Smith and Wesson catalog?
Standard Catalog of Smith and Wesson by Jim Supica and Richard Nahas. Has the serial numbers, models, years, etc. Good book or you can get a copy for ereaders. Or if you have a specific gun go to smith-wessonforum.com and someone can look it up.
What to do if your gun serial number does not match?
If multiple models appear for your serial number simply match the date with the appropriate model, as certain vintage firearms can share serial numbers between different models. If your firearm does not appear in the listing, please understand that this is not a comprehensive database.
How can I find the serial number of a colt?
Enter the serial number, without spaces or dashes, to search the database. If multiple models appear for your serial number simply match the date with the appropriate model, as certain vintage firearms can share serial numbers between different models.
What was the Smith and Wesson K-200 victory revolver called?
During WWII, they used V or SV for the .38 S&W Special and .38 K-200 Victory revolvers. After WWII K, S, C, D, J and N prefixes began. Some later models have the letter mixed in with the numbers.
Are there any Smith and wesson.32 Long caliber revolvers?
In fact, here’s a breakdown of all that we have found for the only Smith & Wesson models that were actually designed for the .32 Long cartridge:
Who are the manufacturers of.32 s and W revolvers?
H&R (Harrington and Richardson) was probably the most prolific manufacturer of revolvers in .32 S&W Long in the mid 1900’s In addition, Colt made hundreds of thousands revolvers (Police Positive, Detective Special, etc.) in Colt .32 New Police which was the same caliber as .32 S&W Long.
Where can I get a Smith and Wesson letter of authenticity?
The S&WHF will now be providing the Smith & Wesson letter of authenticity. A letter of authenticity can help bring new insight about the age, make and model of your firearm. To order a letter, please click the link below to visit the Smith & Wesson Historical Foundation for more information.
How many screws are on a Smith and Wesson revolver?
From 1905 to 1955 most Smith & Wesson revolvers had five screws, four held on the side plate and one in front of the trigger guard. After 1955 the top side plate screw was eliminated, and from that time until 1961 the revolvers were known as 4-screw guns.
In 1930, Smith & Wesson had introduced the .38/44 (.38 on a .44 frame) revolver, which was designed for high-pressure .38 Special loads. As the name suggests, the .38/44 was made on the large N-frame, which dated back to the .44 Hand Ejector Triple Lock of 1908. It was no surprise, then, when the .357 Magnum was built on the N-frame.
What was the serial number of the Colt Pocket Hammerless?
Colt Model 1908 Pocket Hammerless .380 ACP. Its serial number dates manufacture to 1919. This is a Colt’ US Armament reprise of the 1903 pocket model.
When was the first Smith and Wesson gun made?
Production on the Smith Guns began in late 1941, but problems with their manufacture meant that it was not until mid-1942 that the first batch were delivered to the Home Guard; by the beginning of 1943, a total of 3,049 Smith Guns had been issued to Home Guard units.
How to find the serial number of a pre-2002 gun?
Whether your pre-2002 gun has only a serial number mark or you’re sorting through a list of serial numbers for guns to be distributed, for example, in a will, there are ways to figure out the make and model. Do a Google search. Enter the words “gun serial number” in the search bar, followed by the portion of the number before the first hyphen.
What kind of Revolver is Smith and Wesson K frame?
Arch had some guns I yearned for, like Model 70 Winchesters in both .270 and .220 Swift, a Browning Superposed, an S&W K-22 and others. Right from first glance those decades back I knew I loved the looks of that K-22—as well as the feel and balance when Arch had me shoot it at the range.
Are there any non steel Smith and Wesson revolvers?
The later models added a full underlug to the barrel. Alloy K-frames: The only non-steel K-frame revolvers have been the 12 and 315. The Model 12 was offered for many years as a lightweight version of the model 10, but was discontinued in 1986.
Which is the first 7 shot Smith and Wesson revolver?
The 586 and 686 “plus” models were among the first 7-shot medium-frame revolvers on the market, and several lightweight alloy L-frames have been produced at various times. Distinguished Combat Magnum: These are the flagship models of the L-frame line.
Where do you find the serial number on a police gun?
*NOTE: The one TRUE place you can be sure of reading the original serial number for all Hand Ejectors of any vintage with stamped numbers, (which includes any letter prefixed #s after WW II,) is the BUTT of the gun, (or front grip strap on non-round butt .22/32 Kit guns and Targets, .32 & .38 S&W Regulation Police pre Model of 1953 I frames.
Where to look for model number on S & W?
This is where to look for the model number (not used until around 1957). Sometimes the serial number is here, especially in later models. .32-20 Hand Ejector 32-20 Win. K both of these used a shorter than standard cylinder.
How to find the year of manufacture on an S & W?
For example, pre-World War Two models have only numbers, while later models can include letters. These models can begin with the prefix S, N, C, D or K. Consulting the Standard Catalog is the only accurate way to find the exact year of manufacture.