How much binding wire are consumed required for reinforcement steel binding?

How much binding wire are consumed required for reinforcement steel binding?

For 1000 Kg or 1 ton steel bars, the quantity of binding wire should be 9 to 13 Kg. For tying 1 Ton of steel bars with 28 mm or 32 dia, the quantity of binding wire should be approx 7 kg.

How do you calculate kg of tie wire?

Estimate Binding Wires for Tying Rebars

1. We use binding wires to tie the rebars.
2. For rebar tie wire estimate apply thumb rules,
3. Binding wires needed for 1 quintal (100 kg) of steel reinforcement = 0.9 to 1.3 kg.
4. Binding wires needed for 1 ton (1000 kg) of steel reinforcement = 9 to 13 kg.

How many KGS is a roll of binding wire?

WORK OVERVIEW

How is binding wire measured?

The size of the binding wire can be determined based on thumb rules. Typically 1000 kg (1 ton), the size of the binding wire is found to be 9 to 15 kg. According to industry practice, the size of the binding wire varies from 8 to 12 kg per 1000 kg (1 ton) of steel. There is a difference as the bar diameter varies.

Is code for steel binding wire?

12 kg of binding wire required to tie 1000 kg or 1 Ton of 8 mm steel bar. 7 kg of Binding wire required to tie 1 Ton of 28 mm or 32 mm steel rebars. 9 kg to 13 kg of binding wire is required for tie of 1000 kg or 1 ton steel as per IS Code.

How many types of wires are binding?

There are 6 ways of tying binding wires.

How do you calculate the weight of a wire?

1. Wire and Cable Metric Calculations. Dimensions.
2. mils x 0.0254 = mm (millimeters) inches x 25.4 = mm.
3. circular mils x 0.0005067 =mm2. (square millimeters)
4. cu. in.
5. pounds x 0.45359 = kg (kilograms) tons (2000 lb) x 0.907185 = t.
6. lb/1000 ft. x 1.48816 = kg/km.
7. mm2 x 8.89 = kg/km (for copper)
8. °F to °C: °C = (°F minus 32) x 5/9.

What is the thickness of binding wire?

0.90mm
Binding Wires, Thickness: 0.90mm. Binding wire is also called annealed wire / tie wire / bale wire. It is widely used in the construction field for tying the re-bars at the joints so as to keep the structure intact.

What is the HS code for binding wire?

72179099
Apply Filters on Binding wire and Hs Code 7217 Exports

Is for binding wire?

Binding Wire is used for the purpose of tying applications in the field of construction. It is used extensively in the construction sector for tying the rebars at the joints so as to keep the structure intact. Binding wire is also called annealed wire and is made of mild steel.

Is standard for binding wire?

Quality / Specification The binding wire should be 16 or 18 gauge annealed wire conforming to IS 280. It shall be free from rust, oil, paint, grease, loose mill scale or any type. Highly stringent. Its tensile strength is half hard i.e. the Tensile Strength: 250-430 N/mm2.

What is the raw material of binding wire?

Raw Material: Shinestar Binding Wire is made using JSW (Jindal Steel Works) wire rod. This is the highest quality of wire rod available in the Indian market.

How much binding wire is needed to tie a ton of steel?

● 12 kg of binding wire required to tie 1000 kg or 1 Ton of 8 mm steel bar. ● 7 kg of Binding wire required to tie 1 Ton of 28 mm or 32 mm steel rebars. ● 9 kg to 13 kg of binding wire is required for tie of 1000 kg or 1 ton steel as per IS Code. ● 12 kg to 13 kg binding wire is required for 1000 kg or 1 ton of 8mm -16mm steel rebar.

How to calculate quantity of binding wires for steel bars?

Requirement of binding wires for 1 quintal (100 kg) of steel reinforcement = 0.9 to 1.3 kg Requirement of binding wires for 1 ton (1000 kg) of steel reinforcement = 9 to 13 kg

What is the procedure to take out the quantities of binding wire?

For 1 tonne (1000kg) = 9 to 13 kg binding wire will be required . Further as per the industry practice the Quantity of binding wire used varies from 7 kg- 13 kg per ton of steel.

What kind of wire is used for binding reinforcement?

Binding wires and the types of tying the wires to bind the reinforcement. It is used for binding reinforcement construction. It is made of mild steel inker, which takes place in the form of thermal processing annealing. Binding wire is also called annealed wire.